Question about 2006 Jeep Commander 5.7
Tried using keys to manually unlock doors. also used remote
Under the dash board on your driver side there is a wire with a button turn the ignition but don't turn it on and hold the button on the wire till u get a steady light.. Deactivated
Posted on Mar 16, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
put your key in the door and turn it firmly to the unlock postion... I believe it is to the front of the car... then back to center...
The factory alarm can be armed /disarmed by the key in the door.
Posted on Jun 23, 2009
I found a solution on another site showing if i turn the ignition on and hold the reset button on behind the alarm light untill it turns to solid blue light then turn off the ignition , it will disable the alarm.
Posted on Dec 13, 2009
With the drivers window down, and the doors closed. and locked connect the battery and lock and unlock the tailgate with the key, you need to unlock it twice to unlock the doors and turn off the alarm. If the locks are working like thier supposed to the drivers door will be unlocked and opening it won't set off the alarm. the truck should be back to normal. If not disconnect the battery again. Drivers window down. Put the key in the switch and turn the key on to the run position. With all the doors closed connect the battery. connect it good and don't bounce it around. If the battery casbles aren't clean clean them good so it'll connect good. If it still is alarming then the doors switches are likly. Or the door locking motors. You should be able to lock all the doors ( including the hatch) by hand and get the system to reset. Try it all again using a different door to double unlock as a lock switch might be sticking. If the system can't verify that all the doors are closed and locked it won't reset. If you connect the battery wihg the key turned on the system thinks it's already running and appeares to be in the unset mode.
Posted on Dec 16, 2010
Tips for a great answer:
Oct 02, 2016 | 2005 Dodge Magnum SXT
Jul 25, 2016 | Cars & Trucks
Jan 22, 2015 | 2009 Nissan Versa Hatchback
Jul 11, 2012 | 2007 Volkswagen EOS Convertible
May 24, 2012 | 1991 Acura Legend
Apr 24, 2017 | 2006 Subaru Impreza
Mar 05, 2010 | 2000 Nissan Maxima
Feb 28, 2010 | 2004 Hyundai Tiburon
Apr 09, 2013 | 2006 Jeep Commander 5.7
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: