Question about 2006 Suzuki Forenza

1 Answer

If the idler pulley and gives out and the timing belt skips and i replaced the idler and belt but im still getting no compression

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,669 Answers

Somehow your timing is off. The gears involved with the cams and crankshaft are not in the right positions. You really should get the Haynes car manual at your local auto supply store for your make, model and year of car. It will show you the correct alignment. Please do NOT try to start the engine before you follow the procedure in the book.

Posted on Jan 10, 2013

  • kthea
    kthea Jan 10, 2013

    but there is oil getting into the piston cylinder?

  • Leigh Perlmutter
    Leigh Perlmutter Jan 10, 2013

    The oil has nothing to do with your compression problem if your timing is off! If the valves remain open when there is a comporession stroke, there will be NO compression!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the timing marks for belt replacement on the 1.6L SOHC 1990 Geo Prizm


1.6 engine, timing belt. 4A not 4AF. F = twin cam.
V.I.N. code 6 not 5, the 5is twin cam 4AFE twin.
the car is a Corolla, and as such info is easy to find on toys,
so that the engine real name is.
http://en.wikipedia.org/wiki/Toyota_A_engine#4A

so you dont want all the facts? marks and how to set tension correctly? really? at #12 and 18?
getting all this right, makes it GO 60k more miles, (a fact)

the words.
  1. Remove the timing belt covers using procedures described earlier in this section.
  2. If not done as part of the cover removal, rotate the crankshaft clockwise to the TDC/compression position for No. 1 cylinder.
  3. Loosen the timing belt idler pulley to relieve the tension on the belt, move the pulley away from the belt and temporarily tighten the bolt to hold it in the loose position.
  4. Make matchmarks on the belt and both pulleys showing the exact placement of the belt. Mark an arrow on the belt showing its direction of rotation.
  5. Carefully slip the timing belt off the pulleys.
  6. dont move cam, with belt off it warns.
  7. Remove the idler pulley bolt, pulley and return spring.
  8. Use an adjustable wrench mounted on the flats of the camshaft to hold the cam from moving. Loosen the center bolt in the camshaft timing pulley and remove the pulley.
  9. Check the timing belt carefully for any signs of cracking or deterioration. Pay particular attention to the area where each tooth or cog attaches to the backing of the belt. If the belt shows signs of damage, check the contact faces of the pulleys for possible burrs or scratches.
  10. Check the idler pulley by holding it in your hand and spinning it. It should rotate freely and quietly. Any sign of grinding or abnormal noise indicates replacement of the pulley.
  11. Check the free length of the tension spring. Correct length is 38.5mm measured at the inside faces of the hooks. A spring which has stretched during use will not apply the correct tension to the pulley; replace the spring.
  12. If you can test the tension of the spring, look for 8.4 lbs. of tension at 50mm of length. If in doubt, replace the spring.
  13. Reinstall the camshaft timing belt pulley, making sure the pulley fits properly on the shaft and that the timing marks align correctly. Tighten the center bolt to 43 ft. lbs.
  14. Before reinstalling the belt, double check that the crank and camshafts are exactly in their correct positions. The alignment mark on the end of the camshaft bearing cap should show through the small hole in the camshaft pulley and the small mark on the crankshaft timing belt pulley should align with the mark on the oil pump.
  15. Reinstall the timing belt idler pulley and the tension spring. Pry the pulley to the left as far as it will go and temporarily tighten the retaining bolt. This will hold the pulley in its loosest position.
  16. Install the timing belt, observing the matchmarks made earlier. Make sure the belt is fully and squarely seated on the upper and lower pulleys.
  17. Loosen the retaining bolt for the timing belt idler pulley and allow it to tension the belt.
  18. Temporarily install the crankshaft pulley bolt and turn the crank clockwise 2 full revolutions from TDC to TDC. Insure that each timing mark realigns exactly.
  19. Tighten the timing belt idler pulley retaining bolt to 27 ft. lbs.
  20. Measure the timing belt deflection (Tool 23600 B or similar), looking for 5-6mm of deflection at 4.4 pounds of pressure. If the deflection is not correct, readjust the idler pulley by repeating steps 15 through 18.
  21. Remove the bolt from the end of the crankshaft.
  22. Install the timing belt guide onto the crankshaft and install the lower timing belt cover.
  23. Continue reassembly of the timing belt covers as outlined previously in this section.


25607983-3uasjzd4mulxtskqjlrmltjn-4-0.jpg

Mar 26, 2015 | 1990 Geo Prizm

1 Answer

Please could you give me a diagram of the valve timing of a double O.H.C.on a toyota Rav4 3SFE engine


no year(94-present) stated. and under kia dont help much.

its at alldtata.com, i read all the steps and not skip one, I WOULD.

wild guess, #1 a 2005 RAV4
2.0L 3sfe. inline 4 cylinder, not V6


here is the one i see on the FSM.

my gates belts all come with a manual. RTM?
if you buy the belt at a dealer they assume you have the FSM.
right?
FSM, install, steps
  1. Install the oil pump pulley. Tighten the nut to 18 ft. lbs. (24 Nm).
  2. Install the crankshaft timing pulley. Align the pulley set key with the key groove of the pulley. Slide on the pulley facing the flange side inward.
  3. Install the No. 2 idler pulley and tighten the mounting bolt to 31 ft. lbs. (42 Nm). Be sure that the pulley moves smoothly.
  4. Install the No. 1 idler pulley with the bolt and the tension spring. Pry the pulley toward the left as far as it will go and tighten the bolt. Make sure that the pulley moves smoothly.
  5. Temporarily install the timing belt. Using the crankshaft pulley bolt, turn the crankshaft and position the key groove of the crankshaft timing pulley upward. If reusing the timing belt, align the points marked during removal.
  6. Install the timing belt on the crankshaft timing pulley, oil pump pulley, No. 1 idler pulley, water pump pulley and the No. 2 idler pulley.
  7. Install the timing belt guide.
  8. Install the lower (No. 1) timing belt cover and new gasket with the 4 bolts.
  9. Align the crankshaft pulley set key with the pulley key groove. Temporarily install the crankshaft pulley and bolt.
  10. Align the camshaft knock pin with the groove of the pulley, and slide the timing pulley onto the camshaft with the plate washer and set bolt.
  11. Tighten the pulley set bolt to 40 ft. lbs. (54 Nm).
  12. Turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  13. Finish installing the timing belt and check the valve timing, as follows:
    1. If reusing the old timing belt, align the matchmarks made previously and install the timing belt onto the camshaft pulley.
    2. Align the marks on the timing belt with the marks on the camshaft pulley.
    3. Loosen the No. 1 idler pulley set bolt 1 / 2 turn.
    4. Turn the crankshaft pulley 2 complete revolutions TDC to TDC. ALWAYS turn the crankshaft CLOCKWISE. Check that the pulleys are still in alignment with the timing marks.
    5. If the No. 1 idler pulley uses a green tension spring, slowly turn the crankshaft pulley 1 7 / 8 revolutions, and align its groove with the mark at 45 degrees BTDC (for the No. 1 cylinder) of the No. 1 timing belt cover.
    6. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm).
    7. Be sure there is belt tension between the crankshaft and camshaft timing pulleys.
  14. Place the right-hand engine mounting bracket in position but do not install the bolts.
  15. Install the upper (No. 2) timing cover with a new gasket(s).
  16. Remove the engine crankshaft pulley bolt and pulley.
  17. Using SST 09249-63010, or equivalent, install the mounting bolts for the right-hand mounting bracket. Tighten the mounting bolts to 38 ft. lbs. (52 Nm).
  18. Align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).
  19. Install the spark plugs.
  20. Install the right-hand mounting insulator, as follows:
    1. Attach the mounting insulator to the body and mounting bracket with the 4 bolts and 2 nuts.
    2. Tighten the 3 bolts to hold the mounting insulator to the body. Tighten the bolts to 47 ft. lbs. (64 Nm).
    3. Tighten the 2 nuts and bolt to hold the mounting insulator to the mounting bracket. Tighten the bolt to 27 ft. lbs. (37 Nm) and the nut to 38 ft. lbs. (52 Nm).
  21. Install and adjust the power steering pump drive belt.
  22. Install the right-hand engine undercover.
  23. Install the right front wheel.
  24. Lower the engine.
  25. If equipped, install the ABS actuator.
  26. Install the alternator and alternator bracket.
  27. Install the wiring harness bracket for the DLC1.
  28. Install the power steering reservoir bracket and reservoir.
  29. Connect the negative battery cable.
  30. Start the engine and check the timing.

step 13.4 is never to be skipped. ask why., most do. and it fails.






a70ecb7d-3231-4383-bdd9-edd2200c74a4.jpg

Jun 07, 2014 | 2002 Kia Sportage

1 Answer

Gearbox chatter on tick over do they suffer from dualmass problems also is there a quick way to change the cambelt


Dual Mass Flywheel, and will also need new clutch Remove the engine coverUsing a [16 mm], rotate the tensioner arm clockwise (about 14° )and remove the belt from the pulley.
Remove the power steering pump pulley, idler pulley, tensioner pulley and crankshaft pulley.
Remove the upper and lower timing belt covers.

Remove the auto tensioner.
NOTE
Rotate the crankshaft clockwise and align the timing mark to set the No.1 cylinder's piston to TDC (compression stroke).
At this time, the timing marks of the camshaft sprocket and cylinder head cover should coincide with each other.




Unbolt the tensioner to remove the timing belt.
NOTE
If you plan to use the timing belt again, mark the rotation direction on the belt so you reinstall it correctly.

SERVICE MANUAL
Applies to: Santa Fe 2004
GROUP
Engine Mechanical System Timing System



INSTALLATION
Install the idler pulley to water pump boss.
NOTE
Insert and install the idler pulley to the roll pin that is pressed in the water pump boss.


Install the tensioner arm and plain washer to the cylinder block.
Install the tensioner pulley to the tensioner arm.
Install the camshaft sprockets and align the timing marks.

NOTE
When installing the camshaft sprockets, fasten them tightly while holding the hexagonal part of the camshaft.
Before installing the timing belt, if the timing marks of the cam sprocket and the cylinder head cover do not coincide, do not rotate the cam sprocket more than 3 teeth in either direction.
Rotating the sprocket more than 3 teeth may allow the valve and piston to touch each other.
If the cam sprocket is rotated more than 3 teeth unavoidably, rotate the crankshaft counter - clock wise a bit before rotating the cam sprocket.
Install the auto tensioner to the front case.
NOTE
At this time auto tensioner's set pin should be compressed and secured with set pin.




Align the timing marks of each sprocket and install the timing belt in the following order. Crankshaft sprocket--> Idler pulley--> camshaft sprocket (LH side)--> Water pump pulley--> camshaft sprocket (RH side)--> Tensioner pulley.
NOTE
In this step, No. 1 cylinder is in the TDC (Compression stroke).
Be very careful if you use your fingers.



Pull out the set pin of the auto tensioner.



Install the upper and lower timing belt covers.
Install the power steering pump pulley, idler pulley, tensioner pulley and crankshaft pulley.
Using the wrench [16mm], rotate the tensioner arm clockwise (about 14°) and install the belt to the pulley.
Install the engine cover.
How to adjust the tension of the timing belt
Rotate the crankshaft 2 turns clockwise and measure the projected length of the auto tensioner at TDC (# 1 Compression stroke) after 5 minutes.
The projected length should be 6-8 mm.
Verify that the timing marks of each sprocket are in their specified position.
NOTE
If the timing marks are not in their specified position, repeat from 6 above.

Dec 28, 2010 | 2004 Hyundai Santa Fe

1 Answer

Como poner la banda de tienpo de un toyota camery


Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence.

Dec 23, 2010 | 1993 Toyota Camry V6

1 Answer

How do I tell if the timing belt is bad. I have the covers off. The crank timing mark is at TDC. the cam marks are also aligned When I first got the covers off the timing belt seemed loose and I could...


Timing belts are supposed to be replaced in intervals, on this vehicle every 60,000 miles. The timing belt may look good, but they mostly stretch over time. As for the looseness and becoming tight, its because there is different compression tension that pull either way. But to be loose to the point you can spin the tensioner pulley, replace everything (belt, tensioner, idler pulley, water pump)!!

Sep 27, 2010 | 1998 Mitsubishi Montero Sport

1 Answer

Im not sure if there is anything major that needs to be done ,but I need to replace the idler pulley and put the new belt on.


I once owned one of these! Great car [at least I thought so] The biggest thing to look for when replacing the drive belts is to make sure all the pulleys turn freely and are in line, and that the belts are tightened properly then rechecked again after a day or so of driving once they have stretched and worn in a bit. Now if you are talking about the timing belt then I would replace the belt, the tensioner, and the idler pulley all at the same time as you DO NOT want the belt to fail or skip as this is an interference engine and the cylinder head and valves will be damaged if the camshaft gets far enough out of time in relation to the crankshaft. Most parts stores will sell you a "timing belt kit" which has all these parts in it and it's well worth the extra cost. Just a note about timing belts: It's easy to forget that they have a limited life span and should be replaced every 60,000 - 100,000 miles [depending on the make and model] to help prevent the very, very expensive damage I mentioned earlier.

Jun 26, 2010 | 1994 Mazda 626

1 Answer

Timing belt replacement


Disconnect negative battery cable. Disconnect power
steering reservoir, and remove reservoir bracket.
Disconnect wire harness bracket for Data Link Conne
ctor No. 1. Remove generator and generator bracket.


Remove ABS actuator. Raise and support vehicle. Rem
ove right front wheel. Remove right engine
undercover. Remove power steering drive belt. Sligh
tly jack up engine and remove right engine mounting

insulator.

Remove spark plugs. Remove crankshaft pulley. . Remove right engine mounting bracket.
Remove No. 2 timing belt cover. . Temporarily install crankshaft pulley with pulle
y bolt. Set No.
1 cylinder to TDC on compression stroke. .

Loosen mounting bolt of No. 1 idler pulley and shif
t pulley toward left as far as it will go to reliev
e belt
tension. . Temporarily tighten idler pulley. Remove cranksh
aft pulley and No. 1 timing belt
cover.

If reusing timing belt, mark direction of rotation
on belt. Also place match marks on belt and camshaf
t
pulley. . Remove timing belt from engine.

NOTE:Always turn crankshaft clockwise.

Mar 18, 2010 | 1997 Toyota RAV4

2 Answers

1999 dodge carava, replaced water pump....won't


i would start by finding the timing marks give the dealer a call just to make sure that the belt runs it if so you will have to remove the belt and set the timing marks and make sure they dont move if you get that rite you should be fine but ask the dealer to make sure im not to sere on that vehical

Apr 06, 2009 | 1996 Dodge Caravan

2 Answers

Need instructions to replace 1993 Toyota Camry Timing Belt


Hi Kmcarroll77

TIMING BELT REPLACEMENT - 2.2L -1993 Toyota Camry

Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence. See Fig. 6 . On MR2, tighten engine
b7619be.jpg
92cabaf.jpg
Hope this helps, don't forget to rate.

Lazaruselite

Feb 25, 2009 | 1993 Toyota Camry V6

1 Answer

1995 FORD TAURUS 3.0 V6


hi,

let me clarify the belt names for you before that, the fan or serpentine belt is the belt which all the accessories run on like the alternator and power steering pump and is different from the timing belt completely. the timing belt is hidden away and you cannot see it on most cars and keeps the camshaft in sequence with the crankshaft, Im not entirely sure but I believe ford V6s have a timing chain. heres the deal, the idler tensioner pulley has to have some tension put on it to bend it up and out of the way while you place the serpentine belt, study the ider tensioner pulley closely and the diagram under the hood, the idler pulley has a large bolt in the middle which you have to put a socket and wrench on .using force against the spring loaded pulley, either push down or up on the pulley with the wrench to temporarily give you the clearance needed to set the belt and gently release, (having a helper helps) once you doublecheck that the belt is PERFECT then start the car. My 83 LTD's idler pulley is adjusted with a bolt, I believed they have changed it to the spring loaded design that I spoke about above, if its the spring loaded design, that should do it,
good luck

J

Jun 14, 2008 | 1995 Ford Taurus

Not finding what you are looking for?
2006 Suzuki Forenza Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...