Question about 2008 Nissan Versa

Open Question

Door handle Versa nissan 2008

My driver door handle is loose! Is it my plastic lock cover that does that ,because its broken? Thank you for your support !!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcgyver468
  • 710 Answers

SOURCE: Passenger side door will not open from inside or outside.

linkage on inside of door has come undone. take off inside door panel and you will find a small rod that goes to the lock mechanism where the door closes opposite the hinges. follow the handle to the door lock.the nylon bushing may have broken.they are cheap to purchase at auto part stores.

Posted on Apr 21, 2009

  • 6 Answers

SOURCE: Noisy central locking Nissan MIcra

Hi there, this is a very common fault, you need to replace the drivers door actuator to stop the noise, ive done loads of these. hope this helps.

Posted on Jun 07, 2009

s_s_m_o_k_i_
  • 162 Answers

SOURCE: 2003 Nissan Murano Driver door won't lock or unlock with keyfob

about 14 bux at this link
http://www.autopartswarehouse.com/search/?N=5716+776&Nr=AND(wpn_tl_name:Auto+Body+Parts+%26+Mirrors,wpn_scat_name:Door+Lock,wpn_cat_name:Doors+%26+Components)&refType=Brand&refValue=Replacement

Posted on Jul 31, 2009

  • 1986 Answers

SOURCE: Removal of Front Door Handle Pintara Nissan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Posted on Sep 21, 2009

  • 1 Answer

SOURCE: drivers side door won't open

I have a 2003 nissan altima and the door has woked fine all night and now the door will not open from the inside. It is just a broken spring?

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I install the exterior driver side door handle?


You will almost definitely have to remove the inner door trim etc to access the rods etc that work the lock.
Try youtube.

Feb 17, 2016 | 2008 Nissan Versa

1 Answer

Nissan versa plastic door handle lock cover popped off


Look for clips, screws, brackets,etc,and try get all in place, the covers can fit in a specific way.
Apply some glue to hold it in place, providing that the cover fits perfectly, if needed to visit the mechanic or bodyshop.

Jan 24, 2014 | 2009 Nissan Versa Hatchback

1 Answer

How do i replace the front driver's side window motor on my 2007 nissan versa


To remove the interior trim panel from the door. Carefully pry off the plastic cover over the rear half of the inner release handle, the locking tabs are easy to break. In the bottom of the pull pocket remove the screw cover with a small screw driver or knife tip. disconnect wiring & switches. Remove any visible screws attaching trim panel to door. Insert a thick putty knife [approx. 2" wide] between plastic panel & door, slide around edge locating plastic retainers, pull outwards to pop loose. Finally lift trim panel straight up to release top lip. If the panel won't come loose in the speaker area, look for a removable cover with hidden screws. Next is the vapor barrier, it is important not to just rip holes in it. Start at the back and peel about 2/3rds of it forward. If it's attached with clear adhesive, it will need to be reglued or at least taped back in place. If it uses a sticky black or white adhesive it will restick itself when you put it back. A sharp knife or singe edge razor blade is usefull during the removal process. The window glass is unbolted from the lift/regulator assy with two small bolts. Raise or lower the glass by hand to line up with access holes, after bolt removal tape the glass in the up position. Unplug the electrical connector. Unbolt and remove regulator and motor as an assy from the door. Remove motor from assy and reverse process. If the cable regulator is broken, it is a dealer item, approx. $120.00. If the motor is bad, dealer price is around $240.00, but it should be easily available at your local parts store for much less. Labor at a qualified Autobody Repair Shop should be about 1.3 hours.

Mar 08, 2013 | Cars & Trucks

2 Answers

Drivers side door won't open


I have a 2003 nissan altima and the door has woked fine all night and now the door will not open from the inside. It is just a broken spring?

Dec 15, 2008 | 2002 Nissan Altima

1 Answer

DOOR WON'T OPEN FROM INSIDE OF NISSAN ALTIMA 2002 ON DRIVER'S SIDE


There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.

Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.

Hope this is helpful!!



Nissan Scope Technician- 10+ years experience in Nissan dealership

Nov 09, 2008 | 2002 Nissan Altima

2 Answers

Kia Door Handle


Remove the door trim inside by loosen 3 bolt with screw driver, then pull out the door trim, after that loosen the hex.bolt (3 hex-bolt) on lock mechanism bracket, after that you can loose bolt (4 hex bolt) on handle cover. Be careful to not drop the bolt, because the gap on sliding door is too narrow. After you removing the handle assembly you can see where is the broken. You can remove the handle from cover by removing pin clips on it. To fixing the broken handle you can just using plastic glue or you can drill a small hole and put some small wire to reinforce the plastic.


Oct 16, 2008 | 2003 Kia Sedona

1 Answer

Broken door lock on a 2003 honda civic


There are retaining screws around the handle and the door release handle. The screws may be covered with plastic circle cover. Take those out and just start pulling the plastic panel away from the door gently yet firmly. Once you get the panel loose lift up on the panel to get it off the door.. be careful or wires that may be connected to the panel when you take it off the door.

Sep 05, 2008 | 2003 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...