Question about Dodge Ram 1500

Open Question

2001 dodge van 3.9 with no CMP count - Ram 1500 Dodge Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission problem on my 2001 dodge caravan


Not good if it makes a grinding noise. Needs a tech or replacement as something most likely has come loose inside the transmission.

Sep 01, 2012 | 2001 Dodge Caravan

1 Answer

2001 dodge 3500 van cam position sensor location


Crank sensor is in the bell housing of the transmission. Cam sensor is in the distributor.

Jul 25, 2010 | 2001 Dodge Ram 3500 Truck

1 Answer

By turning the key on and off does not pull engine codes in 2001 dodge the system has changed


With the battery connected?
With a Digital Odometer: Turn the Key from Off to On (not start) three (3) times, On the third (3rd) time leave it in the On (not start) position. The Codes will appear in the Digital Odometer Screen. When it is finished it will show "PdonE".
It is on the 2001 Dodge Caravan.
Without a Digital Odometer?
Turn Key the same way and leave the same way.
Watch the Engine Light (yellow) and count and record the blinks. Do it a few times to get the count correct.
These are 2-digit numbers. The last set is 5-blinks and 5-blinks indicating that it is complete.

Jan 01, 2010 | 2001 Dodge Caravan

1 Answer

Engine light on dodge3.8 engine runs rough and idles slow 2001 dodge van


If you want to do it by yourself, I strongly recommend you to buy a manual book because there is a built-in self dianostic Check Engine light codes. And how to do it, just insert the key into the ignition and do it three times, Turn On and Off the switch but don't start the engine, and you will see the check engine blinking. Count the blink and start with 1-2 blinks, the next blink is to tells you where is the problem and it will end to 5-5 blinks.(BLINK is the CODE) and you could check in the book. If you know somebody has an OBDII Scan/Diag.,thats will be easy. ok

Jan 01, 2010 | 2001 Dodge Caravan

1 Answer

HOW TO INSTALL THE PROSTART STARTER TO 2001


First you will need a transponder bypass modual for a 2001 dodge caravan with MUX output, if your ignition key is grey, you may also need a total of 6 resistors for this van depending on what features you want and at least 2 relays, then just follow the install diagram, if you run into ant problems you know where to find me, I have done dozens of thses vans so I know what will be required, if you need the bypass modual or any of the 6 resistors let me know

Nov 05, 2009 | 2001 Dodge Caravan

1 Answer

2001 Dodge Caravan Transmission Question.


IF your van is front wheel drive only, the transmission is indeed a 3 speed A413. If your van is all wheel drive, your transmission is a 4 speed A604. Capacity is 4 quarts or so.

Oct 20, 2009 | 2001 Dodge Caravan

3 Answers

Firing order for dodge 2001 ram van 1500,


Here you go:
5.2L and 5.9L engines Firing order: 1–8–4–3–6–5–7–2 Distributor rotation: Clockwise

Diagram link below:

http://www.chiltonlibrary.com/content/images/7924/images/79243g14.gif

Best of luck!
Greg

Jun 14, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

05 DODGE GRADN CARAVAN CMP SENSOR REPLACEMENT


p0304 is a misfire code for the #4 cylinder is the coolant level low...maybe you have a headgasket problem

Oct 20, 2008 | 2005 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...