Question about Cars & Trucks
You mean crank position sensors? No, only one. There should also be a cam position sensor, though.
Posted on Jan 09, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It could be any of the sensors. Take it to any auto parts store that runs the diagnostic computer on it for free and do that. More than likely it will be one of those sensors. I had a oldsmobile that i had them check and it ended up being the MAF sensor. there are many sensors connected with the service engine light.
Posted on Feb 25, 2009
Go to this link and you will have to sign up but you will be able to download the owners manual for free: http://www.gm.com/gmownercenter/saturn/. Hope this is what you need. Thanks for rating my response and for using FixYa!
Posted on May 28, 2009
the coolant temp sensor is located on the right side of the cyl head its small under by the upper rad hose 13mm socket removes it after u take the small connector of,make sure the car is cold coolant will come out when u remove it,,,,check the connector too for corrosion,by only saturn sensor the cheap autozone and aftermarket ones dont read right and give you the same problem as the old bad one
Posted on Oct 04, 2009
Take off, or loosen the front half of the wheel well. There will be 3 screws (7mm) and two trim clips There are two clips on the plastic piece just under the belt. Take those out, and you will have full access to the belt and the tensioner. The tensioner nut (so to speak) is 9/16, and cannot be accessed with a socket. Must use a wrench with a long handle. At that point, hook the wrench to the nut and turn it clockwise to loosen. Remove the belt, and replace it with a new one
Posted on Nov 22, 2009
If you are trying to replace the intake manifold due to a crack in the plastic check out a great option in repairing it.
Posted on Jun 03, 2010
Tips for a great answer:
Jan 31, 2011 | 2002 Saturn Sl
Nov 23, 2010 | 2002 Saturn S-Series
Mar 01, 2010 | 2002 Saturn S-Series
Feb 07, 2010 | 2002 Saturn S-Series
Nov 08, 2009 | 2002 Saturn Sl
Jan 02, 2009 | 2000 Saturn SL
Dec 23, 2008 | 2001 Saturn SL
Aug 12, 2008 | 1992 Saturn SL2
20 people viewed this question
Usually answered in minutes!