Question about 2008 Chrysler Sebring Convertible
My cd player is a 6 disc player, whenever I try to play a cd the player says disc read error and spits out the cd; it does that with any cd, old or new. I'm not sure if this is an issue that I can fix by resetting something or what?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Code 1495 = Leak Detection Pump Solenoid Circuit
Remove the connector from the solenoid (should be on the back wall, just to the drivers side of the air-hat). You will have the solenoid to check and the harness. What you want to measure is the voltage coming from the harness and the resistance of the solenoid.
Turn the key to the "ON" position but do not start the motor; the voltage at the connector should be at least 10V or more,.now, check the resistance of the solenoid (should be around 35 ohms).
Posted on Jun 03, 2010
SOURCE: Have 2002 town and country,
There really isn't anything you can do yourself, other than cleaning the lens using a cd/DVD player lens cleaning disk. Also check that the disks you are using are clean and free of scratches. If the player still doesn't work right, you will have to get it serviced at the dealer. Some electronics repair shops will also service these players, but you will have to remove it from the vehicle yourself. Hope this helps. Good luck.
Posted on Mar 12, 2011
The best thing you can do for yourself is get a manual. There are vehicle specific ones available such as Haynes, that have all info you will need to do that job. Pay careful attention to the correct positioning of crank and cam pulleys If you get it wrong, it may cause larger problems. I suggest that after it has been re-assembled, you turn the engine by hand four full turns, to ensure that valves are not striking pistons.
Posted on Mar 18, 2009
Tips for a great answer:
Apr 10, 2015 | Chrysler Cars & Trucks
Oct 06, 2013 | 2004 Honda CR-V
Jun 29, 2012 | 2001 Hyundai Accent
Oct 01, 2011 | 2003 Ford Focus
Oct 11, 2009 | 2002 Volkswagen Jetta TDI
Apr 10, 2009 | 2003 Dodge Grand Caravan AWD
Jan 20, 2009 | 2002 Lexus SC 430
575 people viewed this question
Usually answered in minutes!