Question about Mazda MAZDA5

Open Question

Mazda mx5 mk2 width including wing mirrors - MAZDA5 Mazda Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 548 Answers

SOURCE: How to remove door card on MX5 (2002)

Get a trim removal tool to use in pulling the door panel off. You will have to remove the screws under the arm rest as you find them. I would start at the bottom of the door and work up. You may want to assume that the work will progress better if the window is down before you begin. Mind the door handle as you remove things as the biggest complaint I've seen is that it fails to work right on the first try after getting things put back. Keep a magnet that has a telescoping arm handy to pick up things that fall to the bottom of the door. To remove window crank handles if you have them, put the trim tool behind the handle and engage the wire clip to remove it.

Posted on Jan 08, 2009

  • 107 Answers

SOURCE: how do you replace mazda mx5 wing mirror have took

There should be screws hidden underneath the cover at the base of the mount for the wing mirrors - if you look around the cover, you should be able to pop it off and get at the screws.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the recommended tyre pressures for a 2004 mk2 Mazda mx5?


on the decal on the door pillar drivers side
talk with a tire retailer as they have the pressures for the brand of tire you are using

Apr 26, 2017 | Mazda Cars & Trucks

1 Answer

I have a 1999 model mazda mx5 that smashed the passanger mirror off and now my passanger window wont go up and down there are 3 wires that are not connected is there anyway I can connect them without...


It is not my friend , they definitely working together with same power so if u do any think wrong u can kill windows motor and it will cost u more then mirror so go to advance auto parts and see what they got in stocks !

Feb 04, 2015 | Mazda Cars & Trucks

1 Answer

How do you replace mazda mx5 wing mirror have took door panel off no bolt


There should be screws hidden underneath the cover at the base of the mount for the wing mirrors - if you look around the cover, you should be able to pop it off and get at the screws.

Jan 15, 2010 | 1997 Mazda MX-5 Miata

1 Answer

Mx5 mk2.5 slight engine oil leak.


Can you tell us more?
How many miles on the car?
Which side of the engine area? Drips after you park etc?
Oil ever low? If so how often do you ad oil?
Any visible oil on engine and bay components under hood?

likely areas for oil leaks may include depending on model and make:
Oil pan gasket seal.
Oil pressure sending unit.
Oil filter installed dry or over tightened at your last oil change.
Oil drain plug loose or plug gasket needs replacing.
Valve cover gasket needs replacing.
Crank shaft seals need replacing.
Distributor seals need replacing.
RTV gasket sealer beyond expected life and need replacing for other engine components, inspection plates or covers.

Sep 21, 2009 | 2002 Mazda Miata

1 Answer

MX5 (2006) replacing wing mirror


at the top of the door pull handle there is a cover over a set screw. do not pull on the door to hard or you will break it and then your door panel is no good. you must remove the little cover at the top, just gently pry it of with a screw driver and remove the screw underneath.

Jul 12, 2009 | 2002 Mazda Miata

1 Answer

The bonnet on my mx5 is high on one side


Found the problem one of the bonnet hinges was beginning to seize up put loads of wd40 on it moved the bonnet up and down to ease the oil in. Then closed the bonnet and pused down on it where the hinge is so that it became level with the wings. I then just loosend the bonnet nuts slightly closed the bonnet and moved it into the best position carefully opend it and did up the nuts if the headlamps are still a bit low open the bonnet and just pull gently on the back of the head lamp and they wil come into place job done it looks great

Mar 21, 2009 | 1996 Mazda MX-6

1 Answer

How to remove door card on MX5 (2002)


Get a trim removal tool to use in pulling the door panel off. You will have to remove the screws under the arm rest as you find them. I would start at the bottom of the door and work up. You may want to assume that the work will progress better if the window is down before you begin. Mind the door handle as you remove things as the biggest complaint I've seen is that it fails to work right on the first try after getting things put back. Keep a magnet that has a telescoping arm handy to pick up things that fall to the bottom of the door. To remove window crank handles if you have them, put the trim tool behind the handle and engage the wire clip to remove it.

Jan 08, 2009 | 2002 Mazda Miata

1 Answer

Wiring up the heater elements on the electric door mirrors.


Hi,
I have a Mazda 6 Estate - I've just had the glass out of my mirror this evening, because my mirror heater is not working - there was a bunch of wires into the mirror unit - two of which went to spade connections on the back of the mirror.
The glass itself is on a plastic mount. The mount and the glass should just lever/pull out - that's what I did with mine - I was worried it was going to break though, it took substantial force! Once out I could see a plastic rectangle with rounded corners that it had been clipped onto. It clipped back into place with out any difficulty (on mine there is a wire guide behind the glass - just make sure that you haven't bent it upon removal - I had, but the pliers straightened it again).

Oct 12, 2008 | 2002 Mazda Miata

2 Answers

1989 Mazda MX5 - Right tail lights not working


check globe ,wiggle wires,check fuse clean light housing

Oct 05, 2008 | 1990 Mazda MX-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...