Question about Cars & Trucks
Can you guys help me out please
Someone would need to check the neutral safety switch for power if it is an automatic, or the reverse switch if it is a manual.
Posted on Jan 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it is very difficult to match wiring harness from auto tranny to manual tanny they are different connectors and reverse lights on auto tranny was connected to the nuetral safety switch about 6 to 8 different wires on manual tranny there is a switch located on the top of the tranny and backup lights are connected only with 1 wire you may need to get some help from auto electrition this should not cost alot of money to fix thanks
Posted on Mar 14, 2009
It could be that your syncro for the reverse gear is gone. Which would have to be brought to a tranny shop not a do it your self type of job.
Posted on Mar 26, 2009
take it back. They missed something. You should have a warranty on the work. Of course that does have limits which include both mileage driven and months since the vehicle was released to you. I am guessing you did not do the work since your saying you had it done. There really isn't much you can do other than have it taken apart and checked. So long as your TCM (transmission control module is not bad= computer for transmission)
Posted on Jan 11, 2010
SOURCE: My check engine light came
your car needs to be diagnosed with an obd2 scanner to determine what is causing the problem. take it
to an autozone autoparts store, they will diagnose it free of charge, give you a print out on whats wrong,
and may even carry the parts you need, once the problem is corrected they can reset your check
engine light with the obd2 scanner. or if you replace what ever it needs you can do a reset by
disconnecting the negative side of the battery wait 30 seconds and then reconnect it.
Posted on Feb 26, 2011
Tips for a great answer:
May 26, 2011 | 1998 Honda Civic
Feb 26, 2011 | 2006 Honda Civic Hybrid
Sep 19, 2010 | 1995 Honda Civic
Jul 28, 2010 | 2001 Honda Civic
Jul 02, 2010 | 1994 Honda Civic
Mar 28, 2009 | 2002 Honda Civic
Mar 14, 2009 | 1997 Honda Civic
Jan 15, 2009 | 1992 Honda Civic
30 people viewed this question
Usually answered in minutes!