Question about 2004 Pontiac Grand Am

1 Answer

Clicking noise from the blinker wont turn off!

The noise the blinker makes when you have your turn signal on stays on when your turn signal is off

Posted by on

  • Anonymous Jan 27, 2009

    Had the same problem they replaced the muti- function lever, costly repair almost 500$ lucky it was still under warrenty!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

There are 2 common things that cause this.
1. the hazzard flasher is faulty. the hazzard button and the turn signal flasher are all in one. Sometimes pushing the hazzard button in slightly will get the noise to happen, and is an indication it is faulty.
2. The turn signal switch in the steering column is bad. Turning the turn signal from left to right- very fast and harshly, will sometimes clear it up for awhile.
Tech JK
--------------

Posted on Jan 24, 2009

  • kenneth sharp Sep 28, 2013

    hear the turn signal sound but no light

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The blinker in my 2002 Chevy Malibu won't stop making the blinker noise...even when the blinker isn't turned on. Driving me insane!


the blinker control under and to the right of the steering column under the knee panel is out its a cheep part you remove the knee panel an turn on the turn signals listen for the ticking you find that part unplug it and replace it yours is bad worn contacts this is a cheap part easy to fix don't let people rip you off good day

Feb 15, 2013 | 2002 Chevrolet Malibu

1 Answer

1997 ford ranger right turn signal doesn't work


Find and replace the flasher. Turn the other blinker on and follow the clicking noise. It will be a small square cox making noise

Sep 01, 2012 | 1997 Ford Ranger SuperCab

1 Answer

I have a 2000 Dodge Durango and we have been having blinker problems too lately. Sometimes they worked, sometimes they didnt, and the other day they went out completely.They have been doing this for a...


that vehicle has a desperate relay for the hazards which is why they work, you have a defective signal flasher sometimes called a signal relay, follow the noise to locate exactly where the part is, usually under driver side of dash, it is a very cheap part and easy to install.

Sep 26, 2011 | 2000 Dodge Durango

1 Answer

Blinkers do not stay on. flashers work. Brake


you need a new turn signal flasher

Sep 01, 2010 | 1998 Ford Explorer

1 Answer

Blinkers will not stop making noise


its time to replace your flasher relay

Jun 03, 2009 | 1999 Ford Crown Victoria

1 Answer

1998 xle v6 camry - signal lights freezes at times. Right or left or emergency, they freezes at times. The signal light freezes, does not blink, just stays on. So I have to do the signal again. Usually it...


Sorry but it took me a lot of time before having it fixed. Well, I think the problem started with the turn signal switch. It used to make a noise. Something like "ZZZZZZTT" whether you're turning right or left. So I had them replaced for CN$300, including the labor. The actual problem is the "blinker". It's been damaged. To replace it will cost you about CN$100 just for the part. You can replace it by yourself.
I am not really a mechanic but it looks like what happened was the turn signal switch has damaged the blinker since it was not sending the right signal to it everytime it is activated.... Is it?

Feb 16, 2009 | 1998 Toyota Camry

3 Answers

98 Buick Lesabre Blinker Problem


If ALL Wiring in Trunk is Good Then Its The SWITCH = Multifunction Switch<<

Feb 11, 2009 | 1997 Buick LeSabre

6 Answers

Beeping Noise/Blinker Noise


sounds like your electronic flasher unit maybe stuck causing the noise. they are generally located under the dash on driver side just below the instrument cluster.

Sep 10, 2008 | 2004 Oldsmobile Alero

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...