Question about 2006 Toyota Land Cruiser
I changed the oil but change oil light stay on how to resit the driver manual lost
Mmuha is right in his solution of June 27 2009. The ODO must be reading either trip a or trip b, not the total mileage, (otherwise you sit there for ages waiting for the dashes to appear).
Turn key off.
Posted on Jun 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Previous Post dead wrong...
Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.
Turn ignition OFF
Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.
Posted on Jun 27, 2009
SOURCE: oil change light
Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.
Posted on Sep 22, 2008
This is really easy! Please follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON; do NOT start the engine
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and the light will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps, and thanks for choosing FixYa. Happy Thnkasgiving!
Posted on Nov 25, 2008
SOURCE: d4d smoking
try wynns/redexe to clean injectors/lines,they do seem to smoke a lot though....
Posted on May 02, 2010
Testimonial: "Thanks, yes, I thought common rail should be low emmisions, less particulate!?, but I'm not sure."
Tips for a great answer:
Oct 10, 2016 | Cars & Trucks
Jul 24, 2016 | Toyota Cars & Trucks
Sep 27, 2015 | 2006 Toyota Hilux 3.0
Aug 19, 2015 | 2006 Toyota Hilux 3.0
Feb 20, 2015 | Toyota Cars & Trucks
Feb 01, 2014 | 2006 Toyota Hilux 3.0
Dec 27, 2012 | 2010 Toyota Hilux 2.5
Jul 04, 2012 | 2006 Toyota Hilux 3.0
Nov 09, 2011 | 2004 Toyota Highlander
Apr 12, 2017 | 2006 Toyota Land Cruiser
645 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: