Question about 2002 Chevrolet Avalanche

1 Answer

Back door won,t open on my 02 avalanche

Took inside pannel off all parts look good and seem to move propely

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

Door handle broke depends on what door handle it is.if door cant be open on out side out side door handle broke.if cant open door on inside inside door handle broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in place.

Posted on Jan 09, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnjohn2
  • 5763 Answers

SOURCE: Door want open from inside door parts list

replace inside door handle common problem good luck,

Posted on Oct 10, 2009

  • 1 Answer

SOURCE: 1991 Chevy Astro Back doors will not open

You can remove door trim panels from inside the car, panel will come off even the door is closed.
Than put you hand inside door and pull levers to open door.

Posted on Jul 27, 2008

  • 2 Answers

SOURCE: have a 2004 avalanche locking problem

There is a button on the drivers side control panel on the door, where the power window controls are at.. This button is square and it controls the door locks in the back so, young kids can't accidentally open the door. Pressing this button should solve your problem. Good Luck

Posted on Apr 27, 2009

little_shaws
  • 493 Answers

SOURCE: drivers door won't open from the inside

Check the child lock is not engaged. If not you will need to remove the door trim to see what is going on

Posted on Nov 26, 2012

  • 17 Answers

SOURCE: door won't open from inside '98 silverado

your door rod to your latch must have popped off your inside door latch. take your door pannel off and the door rood will be unhooked

Posted on Dec 12, 2012

Testimonial: "That was exactly what happened. It was not easy getting the panel off and back on, and I didn't see what caused the rod to pop off, but if it happens again I will at least no what the problem is. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I took old key cylinder out that was easy putting the new one in was easy sled all the way in . Problem is the key still won't turn ?


may need to take inside door panel off and lubricate the moving parts that move inside the door when the key is turned. Had my previous old car lock freezing up a bit of CRC sprayed on moving parts and key turns.

Nov 20, 2015 | 1997 Honda Passport

1 Answer

My righr rear door sensor say door ajar


I have the same problem with my left rear door (it also sets off the alarm at times when parked). I take some wd40 and spray it into the inside lock slide and move it back and forth a few times. that seems to fix it.

May 30, 2014 | 2003 Chevrolet Avalanche

1 Answer

Door won't open from inside '98 silverado


your door rod to your latch must have popped off your inside door latch. take your door pannel off and the door rood will be unhooked

Dec 12, 2012 | 1998 Chevrolet Chevrolet silverado

1 Answer

2006 Chev Impala - back driverside door won't open from inside or out.


take the panel off the other side door and have a look and compair the two, though there is a small part between the two mechanisms that maybe missing

Jun 11, 2012 | 2006 Chevrolet Impala

1 Answer

Gas release button fell inside the door


You will need to remove the door panel to retrieve your part. There are 4 screws at the bottom of the door pannel the are either torx or philips (I have seen both) remove those bolts, the tweeter cover and you will need to seperate the 2 halves of the pull handle (look close and you will see the split, use a small flat screwdriver) remove the 2 torx bolts. Pull out on the door panel to pull out the door panel clips that secure it to the door but not so hard as to break the upper part. Once all clips are out of the door, pull up to get the pannel off of the door. Then disconnect wiring if you want to completely remove the panel and set aside. I believe that is all the bolts to get the panel off, it's been a little while since I took a door panel off. Hope this helps.

Dec 28, 2011 | 2003 Volkswagen Jetta TDI

1 Answer

2004 Chevy Silverado fuse panel inside gauges


Hi, Most fuse pannel are on left side lower dash board. If not then under the hood near the battery. A black box on side pannel,also check relay switch. Good luck.

Nov 01, 2011 | Cars & Trucks

1 Answer

Driver side power window stuck, but the other three windows all work fine - 2002 GMC Jimmy


Define "STUCK"! can you hear a sound comming from the door when you push the window button "like its trying to work but cant" ?? then yes it is truly "stuck" but, is no noise, then check out the window switch in the drivers door, it may be bad. now if it is "stuck" then, remove the door pannel and see what is wrong, could be several different types of probles inside the door that could cause this problem.. most of the time you can simply spray WD-40 on some of the moving parts in the door, then gentally convince the window to move. caution, be very carefull not to have your hands or fingers inside the door while trying to operate the windoww up or down...... you could get hurt if things got moving.
The other problem could be that the indow motor has failed. same thing,, take off door pannel and replace window drive motor, it will have the "regulator built on to it". so replace complete unit.
Have the manual on this jimmy will help!
Hope this helps! Good Luck!

Sep 13, 2011 | GMC Jimmy Cars & Trucks

1 Answer

Passenger side window fell down and wont go back up. Motor seems to be running. Might be off the track. Dont have an owners manual and not sure how to get to the window.


replace the door!! No "just kidding" you realy need a manual, but, other wise, you must remove the door pannel each door is different, but the pannel must come off, then you can get to the track, you will have to see why the window is not functioning because several things can be wrong. you will have to find the bad parts and repair or replace them... go slow and take your time.
dont be afraid of messing up. Ive gone to the junk yard before and looked for a car like mine that had the door apart all ready and looked it over and studied it before i took mine apart.
some times you can practice on one at the junk yard !!!
Not much help sorry! good luck!

Sep 13, 2011 | 2001 Jeep Grand Cherokee

1 Answer

2002 Chevy S10 Third Door Won't Open


I have a 02 s 10 with a stuck bottom 3rd door latch. I took my seat balts loose removed the door panel,also removed the plastic latch yoy use to open door, the top latch was alredy opened and I put a needle nose vise grip on the lever going to the bottom I used to much and broke the little plastic retaing piece that holds the lever.I looked inside door with light saw my latch was in open pos and took pry bar to pry botton door from inside,once opened i used a 10 mm 1/4 in drive to take out 4 bolt's to latch.removed latch placed in vice and heated with burnsomatic torch,the latch is coated with a plastic so i burned it all off with vice grip on the lever to open and pliers the work the part that catches door striker I kept working it until it freed up then put antu seige on put back in truck. I recomend buying a new latch and put anti seize on it. that's my plan but at least it's working for now. or get a good used one from a junk yard. you can e mail me at earltoni@hotmail.com for ant Q's

May 21, 2010 | 2002 Chevrolet S-10

Not finding what you are looking for?
2002 Chevrolet Avalanche Logo

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...