Question about Suzuki Cars & Trucks

Open Question

Po141 o2 sensor heater bank 1 sensor 2 were is this on suzuki carry van

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

warlock61
  • 659 Answers

SOURCE: more 99 cougar problems

there is a fuse for the o2 heaters if one of the sensors blew the fuse they will all be out

Posted on Mar 01, 2009

SOURCE: Getting PO141 trouble code when scanning! Car '03 accord, 2.4 ltr

i spoke to a honda tech , and he confirmed code p0141 on the 4cylinder model is the second sensor.

Posted on Aug 28, 2009

digritz
  • 530 Answers

SOURCE: PO135 Error Code

Bank one stands for the same side as the number 1 cylinder. Sensor 1 is the first sensor in the bank, (closest to the engine or upstream).
In most cases you will find it on the drivers side\left hand side of the engine and above the catalytic converter. Look for it on the lower portion of the exhaust manifold.

Posted on Sep 07, 2009

wracefans24
  • 1985 Answers

SOURCE: code po141 heater circut sensor/where do i find

code is not for heater circuit,
code p0141=O2 Sensor Heater Circuit Bank 1 Sensor 2
that means its an oxygen sensor located in bank 1 which is the drivers side,sensor 2 means its the downstream sensor after the convertor

Posted on Nov 24, 2009

  • 2428 Answers

SOURCE: 2002 Suzuki XL7 2.7

Itsone one cloest to the front of the vehicle thats how there counted

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Po141 keeps coming on even though the part was changes and the code cleared from computer, why?


The P0141 code refers to your o2 sensor heater circuit. while many times replacement of the o2 sensor can solve this problem you possibly have a short or open in your o2 sensor heater circuit. Also was the proper o2 sensor changed p0141 is the bank 1 number 2 sensor. Bank 1 refers to the side of your engine where the #1 cylinder is located sensor 2 should be the second sensor on that side depending on how many sensors you vehicle has. hope this helps

Oct 12, 2013 | 2001 Chevrolet Impala

1 Answer

P134, p0141, po300, po130 and po135. 2005 Sunfire.


Given that most of the trouble codes are for the O2 sensor, I think I would change it. The multiple misfires could be because of improper fuel/air mixture caused by a bad sensor. Disconnect the negative(-) battery terminal then change the sensor. Disconnecting the negative(-) should reset the computer and allow the fuel/air mixture to return to default allowing the engine to start.
P0130 - O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)
P0134 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)
P0135 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
P0300 - Random/Multiple Cylinder Misfire Detected

Jun 16, 2010 | 2005 Pontiac Sunfire

2 Answers

I have a code po141 what i have to do what piece a have to change in where are this pieces


Code PO141 indicates that the heater circuit in the Oxygen Sensor mounted in Bank 1 (Driver's Side) is not working properly. The ECM has determined that the sensor is taking too long to heat up to around 600 degrees and then switch out of close loop mode. If the ECM determines that it is taking too long then a code PO141 will be set. Normally it is the sensor itself that is defective. Replacing the sensor normally will fix the problem. However it can be the wiring harness or a a bad connection. Check the wiring carefully and look for a short in the wiring. If you find none then replace the O2 Sensor. If this does not repair the problem do not replace any other parts. Time to take it to a professional with professional tools and diagnostic skills to find the problem. The O2 sensor is more than likely the problem but there is no guarantee that will fix it.

Jun 10, 2010 | 2002 Chevrolet S-10

2 Answers

Check engine light. code po141 codepo122


po141, may be a bad o2 sensor, rear sensor after converter. the po 141 is low voltage to tps, try replacing the oyxgen sensor first and then reset the codes and drive if the po141 comes back then replace the tps,

Apr 15, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

What is that code PO141 AND PO342


Technical Description O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2)
What does that mean? This code means that the heated circuit in the oxygen sensor on bank 1 decreases time needed to enter closed loop. As the O2 heater reaches operating temperature, the oxygen sensor responds by switching according to oxygen content of the exhaust surrounding it. The ECM tracks how long it takes for the oxygen sensor to begin switching. It the ECM determines (based on coolant temp) that too much time elapsed before the oxygen sensor began operating properly, it will set P0141. See also: P0135 (Bank 1, Sensor 1).
copyscape.gif Symptoms You will likely notice poor fuel economy the illumination of the Check Engine Light.
Causes A code P0141 may mean that one or more of the following has happened:
  • open or short to ground in the wiring harness
  • O2 heater circuit wiring high resistance
  • O2 heater element resistance is high
  • Internal short or open in the heater element
Note: Typically a failed catalytic converter does not cause this code. You're more likely to see a P0420 code for a failed converter.
Possible Solutions
  • Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)
  • Repair short or open or high resistance in wiring harness or harness connectors

Dec 01, 2009 | 2000 Isuzu Rodeo

1 Answer

Code po141 heater circut sensor/where do i find this sensor? where is bank 1


code is not for heater circuit,
code p0141=O2 Sensor Heater Circuit Bank 1 Sensor 2
that means its an oxygen sensor located in bank 1 which is the drivers side,sensor 2 means its the downstream sensor after the convertor

Nov 15, 2009 | 1998 Pontiac Grand Am

2 Answers

Emission code po141 what is the problem thanks


P0141 - Heated Oxygen Sensor (HO2S) Heater Performance Bank 1 Sensor 2

HI, this code if for a fouled O2 sensor that you will need to replace asap.

Jun 01, 2009 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...