Question about 2002 Chevrolet Impala

1 Answer

Sercurity system how do i turn off my security system once it has been activated??

Posted by on

  • Virginia Gibson
    Virginia Gibson Jan 28, 2009

    Security light comes on. Can go to chevrolet dealer and they do something. happened four months later. Not too smart about cars.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 98 Answers

I would need to know more detail in order to help try to solve your problem. I will try to review this tomorrow and over the next few days. If the light is ON the orange or yellow one on the right side of the control panel (where the fuel gauge and all that is) then you can look in your owners manual and it tells in there how to re-set it. If you are having other problems please try to detail them as much as possible and I will try to help any way I can. Please don't go to a dealership for something like this, it is a total rip-off. Good luck and please try to post more details, or let me know if you found in your owners manual and that solved your problem

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Took out factory radio now interior lights and tachometer or radio dont work what is the problem ......is there a loose wire?


If your car has a sercurity/anti theft system you mave have activated it when you removed the radio. If so you may have to get the dealer to reset the system. Hope this helps.

Sep 04, 2013 | 2004 Hyundai Santa Fe

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Sercurity light


Sounds like you have a problem with the wiring in the column.
The sensor in the lock cylinder sends a signal to the PASS module behind the speedo when you put the correct key in and turn to on.
You may need to take the column apart and replace the harness to the lock cylinder.

Dec 18, 2012 | 1995 Chevrolet Camaro

1 Answer

01 camaro sercurity light flashing and car wont start


This is a failure in your antitheft system. The ignition is not reading the key properly, or the ignition is not sending the "ok" signal to the theft computer properly. (Theft Deterrent Module) Either way, the car is not starting due to the failure in this system. This is proven by the SECURITY light. The hard part is finding the broken link in the system's chain. This site will help you understand the problem, along with a possible 100% fix if you decide to go that route.


http://vatspasslockpasskeysecurityhelp.yolasite.com/

May 21, 2012 | Cars & Trucks

1 Answer

How do i bypass the theft sercurity in my ignition because i changed my ignition out to a regular ignition and key without a chip


The security system is still looking for that signal from the chip. That's why you are not starting. Go to this link, should have all the info you need to bypass that.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jan 11, 2012 | 1994 Cadillac DeVille

1 Answer

How do you bypass security system on 97 firebird. If the security light is on the car will not start i need to know how to bypass this. i already had another key made for it that dosent work


HI, PROBLEM AREA ON A WIDE RANGE OF "GM" CARS WHAT IT IS IS THAT YOUR PASSLOCK SYSTEM IS ACTIVATED WHICH MEANS THAT FUEL IS SHUT OFF TO THE ENGINE THEIR IS ONE WAY TO GET AROUND THIS BUT THE PART NEEDS REPLACED YOU NEED A NEW INGITION LOCK CYLINDER THIS HAS THE SENSOR BUILT INTO IT ANYWAYS GET IN CAR TRY AND START IT IT MAY OR MAY NOT ATTEMPT TO FIRE AT THIS POINT LEAVE THE KEY IN THE RUN POSITION AND YOU MUST!!!!!!!!! LEAVE IT IN THE RUN POS. FOR APPROX. 10 MINUTES WATCH THE DASH THE THEFT OR SERCURITY LITE WILL BE FLASHING WHAT THIS WILL DO IS THE BODY CONTROL MODULE LOST MEMORY OF YOUR KEY AND HAS TO RELEARN IT AFTER AFTER 10 OR SO MINS. THE LITE WILL REMAIN ON STEADY MEANING NOT BLINKING ANYMORE TURN KEY OFF THEN TRY TO START CAR.. THIS IS NOT A FIX YOU MUST REPLACE PASSLOCK SENSOR.....

PS: HOPE THIS HELPS, AFFORDABLE AUTO SERVICE 724-575-2821..

Jun 27, 2009 | 1997 Pontiac Firebird

1 Answer

Sercurity system armed


The way to disarm the security system is through either front door lock cylinder using the key or with the factory remote.

Mar 30, 2009 | 1995 Cadillac Eldorado

1 Answer

Sercurity problem


if your vehicle is equiped with an alarm try activating and deactivating the alarm.

May 26, 2008 | 1993 Jeep Cherokee Country

Not finding what you are looking for?
2002 Chevrolet Impala Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...