Question about Cars & Trucks
In my 07 silverado you just move the gear selecter to Nuetral while engine is running and then move the 4 x 4 to whichever position you need
Posted on Jan 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The loss of 2nd 4th and reverse is a common failure on the 4L60E. What happens is the reaction shell has separated from the sun gear. Often a whole transmission is cheaper simply because the remanufactured unit from GM are reasonably priced and the warranty is 3yr 100,000 miles.
Posted on Feb 11, 2009
You will have to take this to a dealer to shut the air bag light off .. Unless it has been in a wreck at one time or another .. if it has it needs the sensor on front end replaced and the module also reset or replaced.. thanks Jerry and holler if you need more.
Posted on Apr 24, 2009
SOURCE: 1991 S-10 Blazer 4x4 4.3
you need to pull the switch out of the dash and look behind the swict hfor the actuator, chances are the stud that touchs the actual relay is broken use a pen or something slender and long to push it to the desiref position, other than thats go to a junk yard and look for that switch, should just pop out with a lil prying..
Posted on May 19, 2009
Tips for a great answer:
Jun 23, 2012 | Chevrolet Cars & Trucks
Jan 14, 2010 | 2001 Chevrolet Blazer
Dec 28, 2009 | 1999 Chevrolet Blazer
Oct 03, 2009 | 1986 Chevrolet Chevy
Oct 03, 2009 | 2001 Chevrolet Blazer
Sep 02, 2009 | 2001 Chevrolet Blazer
Jun 14, 2009 | 2003 Chevrolet Blazer
Jun 03, 2009 | 1998 GMC Jimmy
Jul 16, 2017 | 1998 GMC Jimmy
Dec 12, 2017 | Cars & Trucks
117 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: