Question about 1996 Toyota 4Runner
Tapped and pushed in headlight relay, problem hasn't returned, yet
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Do you have auto lights when it gets dark out? When they come on is it in a parking garage or home garage where its dark If so chances are your switch/relay unit is bad. (or do they come on in daylight too)?
Posted on Dec 25, 2009
Check the charging system first,make sure it is charging 13.65 volts,to 14.25 volts at the battery,with the headlights on,and the ac on high blower motor.
Posted on Mar 11, 2010
Your Corolla has daytime running lights (DRLs). A photocell determines whether it is day or night. Your DRLs turn on automatically in daytime without you operating the light control ("headlight") switch. Your DRLs are actually your headlights on low beam. At night, the photocell senses it is dark and disables the DRLs. When you set the light control ("headlight") switch to HEAD, the head relay closes and the headlights should turn on. Since they don't, I suggest opening the engine room junction block and checking the 40A MAIN fuse and the 10A LEFT HEAD (UPPER) and RIGHT HEAD (UPPER) fuses. In engine room relay block 5, check the 10A LH-LWR HEAD and RH-LWR HEAD fuses. Replace any blown fuses and the headlights should be working normally again
Posted on Sep 30, 2012
Tips for a great answer:
Feb 10, 2018 | Cars & Trucks
Jan 13, 2013 | 2003 Toyota ECHO
Sep 29, 2012 | 2000 Toyota Corolla
Mar 11, 2010 | 1996 Toyota Tacoma
Aug 23, 2009 | 1996 Hyundai Accent
Jun 04, 2009 | 1996 Pontiac Bonneville SE CA Value
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: