Question about 2002 Jaguar S-Type

Open Question

How to replace the rear brake pads in my s type jaguar

My rear brake pads need replacing and need to know the best way of doing this

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 100 Answers

SOURCE: Replacing rear brake light 2001 Jaguar S Type

They are just clipped in from the trunk. plastic tags.
JPTCAT

Posted on Sep 22, 2008

  • 1 Answer

SOURCE: Rear pad replacement on a Jaguar S-Type

Well,

I fill you in what I learned today. I have a 2005 S-Type Jaguar and the dealer sayed it needed new pads in the rear. They wanted $300 just for the pads and another $150 or so to install. That $450 bucks to replace the brake pads only on the rear of the car. And of course, the extended warranty doesn't cover this, so I said no thanks. I found the best brake pads from Napa for $52. I purchased them through my brothers shop- saved a little. I done lots of brake pad replacements over the years, but not on a new car like the Jaguar. Well they are a little different and the frist one took me awhile . Here is the trick. 1) MAke sure the parking brake is off and you do this by starting the car, stepping on the normal brake and then pushing the parking break lever down while shutting off the car. 2) You then take the tire off, use jack stands to ensure safety.3) Take off brake callipers, 2 bolts and the brake pads should just fall off.4) take the anti-rattle plate off the old pads by prying it off carefully with a tiny screw driver- clean and then install on the new ones. 5) Here I release the the valve for the brake fluid. I did not want to damage the system if the fluid went back into the system when I retracted the calliper. You use some fluid, but you can add when finished. 6)You either need one of those brake calliper tools that you push the calliper in with and If you don't have the trick new one with the keys to turn the brake calliper cylinder, you can get by with the old version like I did and use a pair of channel locks to turn counter clockwise, while continuing to turn the tool. The cylinder needss pressure on it while you turn. This will put in in the proper place. 7) Ensure you have the slots up and down so that the pin in the pad fits up into the cylinder. you know this is correct when you have it perfect vertical and center within the calliper. Pay attention when taking off! 8) Set the brake pads in their proper place and then slide the calliper over them. IT should go over freely or else you need to turn more on the cylinder. 9) Tighten the bolts and replace the tire and you are done. Next side!
Hope this helps. -Dave @ dchristi@zianet.com

Posted on Jan 19, 2009

raygin
  • 322 Answers

SOURCE: Brake pads worn, making audible noise.

No special equip. needed. Replace pads with correct type.The discs on a 2004 should still be okay and not need replacement. Be carefull of wires to ABS sensor. Make sure that the fluid level is low enough in the resevoir to allow for the increase in level caused when the new pads are fitted.

Posted on Apr 07, 2009

  • 881 Answers

SOURCE: Problems getting the rear brake pads replaced on

Any brake people will replace brake pads on any car so you must be going to the wrong people

Posted on Sep 23, 2009

  • 149 Answers

SOURCE: replace rear brake pads on 20 dci 2005 x-type jaguar

no rear break pad

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset brake lite on my 2005 X type jaguar?


which brake warning light is on? the xtype does not have pad wear sensors fitted. so i guess you mean the abs light or the handbrake light.more than likely its the abs light and the common problem is the reluctor rings on one or the other of the rear outer constant velocity joints corroded/ fell off get the fault codes out of the abs module to help.

Aug 22, 2015 | 2005 Jaguar X-Type

1 Answer

Does my car have rear hand brake shoes


it may.. I have seen these systems and if they looked at these shoes when they had the wheels off they should have changed them then..not charge extra for this..most newer cars have front and rear disc brakes that use pads.. the rear drum is much smaller in size and has seperate shoes in it.. now, there is a cable clamp you can get that will tighten the handbrake cable to take the extra slack out of the ebrake system..unless you really want these ebrake shoes replaced..did you pay for a complete brakejob? ram it down the shops throat and watch them work on it..I hate these half do it shops...

Feb 10, 2013 | Jaguar X-Type Cars & Trucks

1 Answer

Need to replace rear brake discs and pads


YOU NEED TO REMOVE THE REAR WHEELS.REMOVE PARKING BRAKE CABLE CLIP FROM CALIPER DISCONNECT PARKING BRAKE CABLE.HOLD THE GUIDE PIN WITH A BACK UP WRENCH AND REMOVE UPPER MOUNTING BOLT FROM THE BRAKE CALIPER.SWING THE CALIPER DOWNWARD AND REMOVE THE BRAKE PADS.TO INSTALL NEW PADS.YOU HAVE TO RETRACT PISTON INTO THE HOUSING BY ROTATING THE PISTON CLOCKWISE.PUT EVERYTHING BACK VISA VERSA.

Feb 24, 2010 | 2002 Jaguar X-Type

1 Answer

Problems getting the rear brake pads replaced on 2004 jaguar x type


Any brake people will replace brake pads on any car so you must be going to the wrong people

Sep 23, 2009 | 2004 Jaguar X-Type

1 Answer

Retracting the piston on my 2004 jaguar x-type


are you turning the pistons as u push them?

Sep 04, 2009 | 2004 Jaguar X-Type

2 Answers

Brake pads


NO, only replace rotors if they are warped, or severely gouged.

Jun 09, 2009 | 2005 Jaguar X-Type

2 Answers

Brake pads worn, making audible noise.


No but you need someone that can do a COMPLETE brake job. This means the rotors should be turned or machined to take out warps. You will hear all kinds of suggestions as to brake pads but I use a non-JAG pad but not ceramic. While ceramics have better stopping power they will also warp the disk faster and so you will not have as long lasting brake job

Mar 31, 2009 | 2004 Jaguar S Type

3 Answers

Rear pad replacement on a Jaguar S-Type


Well,

I fill you in what I learned today. I have a 2005 S-Type Jaguar and the dealer sayed it needed new pads in the rear. They wanted $300 just for the pads and another $150 or so to install. That $450 bucks to replace the brake pads only on the rear of the car. And of course, the extended warranty doesn't cover this, so I said no thanks. I found the best brake pads from Napa for $52. I purchased them through my brothers shop- saved a little. I done lots of brake pad replacements over the years, but not on a new car like the Jaguar. Well they are a little different and the frist one took me awhile . Here is the trick. 1) MAke sure the parking brake is off and you do this by starting the car, stepping on the normal brake and then pushing the parking break lever down while shutting off the car. 2) You then take the tire off, use jack stands to ensure safety.3) Take off brake callipers, 2 bolts and the brake pads should just fall off.4) take the anti-rattle plate off the old pads by prying it off carefully with a tiny screw driver- clean and then install on the new ones. 5) Here I release the the valve for the brake fluid. I did not want to damage the system if the fluid went back into the system when I retracted the calliper. You use some fluid, but you can add when finished. 6)You either need one of those brake calliper tools that you push the calliper in with and If you don't have the trick new one with the keys to turn the brake calliper cylinder, you can get by with the old version like I did and use a pair of channel locks to turn counter clockwise, while continuing to turn the tool. The cylinder needss pressure on it while you turn. This will put in in the proper place. 7) Ensure you have the slots up and down so that the pin in the pad fits up into the cylinder. you know this is correct when you have it perfect vertical and center within the calliper. Pay attention when taking off! 8) Set the brake pads in their proper place and then slide the calliper over them. IT should go over freely or else you need to turn more on the cylinder. 9) Tighten the bolts and replace the tire and you are done. Next side!
Hope this helps. -Dave @ dchristi@zianet.com

Nov 18, 2008 | 2001 Jaguar S-Type

Not finding what you are looking for?
2002 Jaguar S-Type Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...