Question about 2010 Nissan Qashqai

Open Question

It is showing maintenence other when i turn the engine on?

When I turn the engine on it is showing maintenance other, then disappears, it never use to show this?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 484 Answers

SOURCE: Maintenance needed comes up on the display for

i found this on a Murano forum, so i cannot validate whether or not it works.
-To reset the maintenance notice on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule" key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.-

Hope this helps,
matt

Posted on Oct 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

Reset maintenance light


There are 2 way to reset the maintenance light on Civic.
1. Manually reset
To reset this maintenance light, you will put the key in the ignition. Next you will press and hold the odometer reset knob, which can be found on the dash where the car's current mileage is located. While you continue holding that know, you will turn the key to the first position but do not start the engine. After about 10 seconds, the maintenance light should disappear. If the light is still on, you can turn off the vehicle and then try the process again. Once the light is off, you are all set until your next schedule maintenance.

2. Hook up a HDS (Honda Diagnostic System) software on a laptop, the light will go off within minutes.

http://www.obd365.com/wholesale/honda-hds-him-diagnostic-tool-with-double-board.html

Apr 17, 2014 | 2003 Honda Civic

1 Answer

Maintanance required lighted up and won't disappear


Engine management problem. Need to see a mechanic who can scan the ecu for faults, could be coolant temp, oxy sensor, coil pack... The list goes on.

Nov 24, 2011 | 2007 Toyota Corolla

1 Answer

How do i reset oil change indicator


  1. Turn the ignition switch to the ON (II) position.
  2. Press the Select/Reset knob repeatedly until the engine oil life indicator is displayed.
  3. Press the Select/Reset knob for more than 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink.
  4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 1OO.

Dec 27, 2010 | 2006 Honda Accord

1 Answer

The maintenance required light came on about a day ago and i don't know why i have changed the oil regularly and done all things possible to keep the car running perfect, if possible is there any way to...


The maintenance light will come on every 5k miles.
All of this info is inside your 05 Scion owners manual.
This light is to be reset after every PM.
The vehicles repair record book will show everything that needs to be checked at that service interval.
To reset the light:
Hold the Trip mileage button in and hold.
While holding button in, turn the ignition key to the run position (Don't Start).
You will see the numbers in the mileage screen, turn to (--------) and then (000000). The lines will start to disappear.
When they disappear completely and the mileage returns into view. Then you can let the button go.
If you have done it correctly the light will be out.

May 12, 2010 | 2005 Scion xB

1 Answer

How do I RESET MY OIL GAUGE TO GO BACK TO 100%? I HAVE TURNED THE CAR TO THE ON POSITION, I THEN GET IT TO WHERE IT SAY 30%, I THEN PRESS THE BUTTON TIL IT FLASHES "cancel" i then let go, then press again...


  1. Turn the ignition switch to the ON (II) position.
  2. Press the Select/Reset knob repeatedly until the engine oil life is displayed.
  3. Press the Select/Reset knob for about 10 seconds. The information display shows the reset mode initial display as shown.
    1. Select the "OIL LIFE" indicator by turning the Select/Reset knob. The display begins to blink. Push the same knob to enter this setting.
    2. The engine oil life and the maintenance item code(s) will begin to blink. Push the Select/Reset knob to reset.
    3. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Nov 14, 2009 | 2007 Honda CR-V

1 Answer

Maintenance needed comes up on the display for engine oil. It was changed 1500 miles ago and that is what the maintenance display shows


i found this on a Murano forum, so i cannot validate whether or not it works.
-To reset the maintenance notice on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule" key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.-

Hope this helps,
matt

Oct 08, 2009 | 2006 Nissan Murano

2 Answers

Yellow/gold wrench is illuminated on dash board


Please note:

Honda makes reference to proper vehicle maintenance in their service/user manual. Consult your authorized Honda dealer before doing anything that may void your vehicle warranty.

https://techinfo.honda.com/rjanisis/pubs/om/AC0606/AC0606O00192A.pdf

Owner's Manual page 193-197.

Resetting the Engine Oil Life
Indicator

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100 %’’ on the odometer/
trip meter display the next time you
turn the ignition switch to the ON
(II) position.

If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON
(II) position.

2. Press the Select/Reset knob until
the engine oil life indicator is
displayed.

3. Press the Select/Reset knob for
more than 10 seconds. The engine
oil life indicator and the
maintenance item code(s) will
blink.

4. Press the Select/Reset knob for
more than 5 seconds. The
maintenance items code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’

Important Maintenance
Precautions

If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
proper maintenance intervals. This
can lead to seriousmechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
Your authorized Honda dealer
knows your vehicle best and can
provide competent, efficient service.
However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualified service facility or
person who is skilled in this type of
automotive service. Make sure to
have the service facility or person
reset the display as previously
described. Keep all receipts as proof
of completion, and have the person
who does the work fill out the
maintenance record. Check your
warranty booklet for more
information.

Information obtained from:

https://techinfo.honda.com/rjanisis/RJAAI001_OMANUAL.ASP?YEAR=2006

If the information provided to you was useful, please rate my response.

Thanks,

OpenSource13

Apr 19, 2009 | 2006 Honda Accord

2 Answers

Steps to reset 2007 honda pilot oil gauge


From page 232 in the 2007 Honda Pilot Owners Manual.

1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Feb 27, 2009 | 2007 Honda Pilot

1 Answer

I changed my oil on my LX and the change oil warning is not reset


RESETTING THE ENGINE OIL LIFE INDICATOR
On LX and EX models

If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON ( II ).

2. Press the SELECT/RESET knob until the engine oil life indicator
is displayed.

3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

Jan 01, 2009 | 2004 Honda Odyssey

Not finding what you are looking for?
2010 Nissan Qashqai Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...