Question about 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Nissan versa 2007 car starts after 3rd try

It will turn over and will finally start after the 3rd or 4th try. It only happens about once a month and has been going on since Oct 2012. I had it tuned up and put fuel injector cleaner in it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Had the same problem when starting do not pump accelerator before starting turn the key wait a couple of seconds for fuel pump to work then turn key to start then car should start

Posted on Feb 15, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Nissan Sentra jerks in 3rd and 4th

the engine light IS on. I will definately check out the fluid in the trans. How much on average does a trans flush cost? Thank you very much for your help. I am currently riding my bike as much as possible till I find a solution, plus gas prices haha.

Posted on Jul 23, 2008

mrgreenz
  • 962 Answers

SOURCE: 2002 Nissan Altima

it is likely the EGR Valve. If you are going to replace it, make sure that it is the exact valve for your car. Take the Vehicile ID number with you to get the exact Valve.Although they may look exactly the same, your car might not run with another EGR. they are caliberated to the engine and it has to be exact.

Posted on Nov 07, 2008

autodr
  • 260 Answers

SOURCE: nissan maxiam can,t start after change fuel injector

make sure you plugged everything back in and no vacuum leaks.

Posted on Nov 15, 2008

hiseyj
  • 99 Answers

SOURCE: nissan versa gas treatment

I agree with Gary, it's not likely the regulator. More than likely it is the check valve in the fuel pump that doesn't hold the pressure after the car is shut off. Adding a treatment won't do anything but drain your wallet.

Posted on Nov 26, 2008

  • 383 Answers

SOURCE: Little to no injector pulse only when starter is engaged

95-97 Maximas had a problem where condensation from the A/C would accumulate in the a/c evaporator case from the drain becoming restricted or blocked, When this would occur, condensation would drip onto the ECM and a problem would develop with misfire and/or starting. I would look at the ECM where the harness connects to it for corrosion problems. If you find it, there is a chemical spray which can be used to clean the terminals and/or you can clean them, although it is time consuming and difficult to due because of how small the terminals are. After things are cleaned up, lightly coat the connections with a dielectric grease. This will prevent electrolysis.I believe you can buy these at Radio shack and possibly at an automotive parts supplier.
Also a drop in voltage during the cranking phase will cause a weak spark. Your ignition is what pulses the injectors. It takes a minimum of 9.6 volts, but ideally you want at least 10.5 or more during the cranking phase if you want to get a spark worth anything. Check the voltage on the primary side of the coil while cranking the engine.
I'll watch to see if things work out for you, let me know. ....mybunkey

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan patrol 55 plate, wont start


maybe but i dont think so, lost key coding woiuld allow to start fine and smooth and then shut down after a few sec. the best way to track this problem would be with a scan tool.
not sure what year or engine is in this nissan 55 plate but scanning for codes would be the best way to start

Dec 01, 2013 | Nissan Pathfinder Cars & Trucks

1 Answer

Trying to find out how to check fuel relay in 2007 nissan versa


Had this problem last summer: car wouldn't start, though turned over, so I bought new battery. The problem turned out to be the fuel pressure regulator, which sits atop the fuel pump beneath your back seat. For a full (if bloody and funny) repair documentary, see http://www.youtube.com/watch?v=0FaJlkQlkTg.

Feb 15, 2013 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

2007 nissan versa wont start sometimes motor turns over but wont crank


When you turn the key to start & the motor turns
or turns over that is the same thing as the crankshaft
turning you call won't crank

So you need to say my engine turns over but it will
not start

You need to check for fuel pressure & spark

Most likely you will need the help of a repair shop

Sep 14, 2012 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Every so often 2007 nissan will not crank if keep trying after about 5 or 10 min will crank will be several days befo happens again


sounds like your starter cylinoid is sticking needs to be taken off and tested and maybe rebuilt or replaced

Apr 26, 2012 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Hang up in third gear loss of power


Hi All

I have a s40 1.9d / 2000 plate,
In the last month or so the car loses revs when changing up to 3rd and 4th gear, I can only get 50 mph max in 3rd gear 80mp in 4th.
The car has just clocked 185,000 miles
Its a great car but a pai at the moment, I've had a service including fuel fillter change added fuel cleaners to the deilsel all to no avail


Any suggestions

Jul 06, 2009 | 2000 Volvo S40

2 Answers

Head bolt settings


1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.fig074.png

Jun 04, 2009 | 1986 Nissan King Cab

1 Answer

'02 Sentra won't start, i.e., dash lights come on but no beep/chi


you need the key with the chip in it. it will have to be programmed to the car. The key and the remote are the only two things that by pass the vss. each trasmit a code that allows the fuel pump and ignition to function.

Jan 14, 2009 | 2003 Nissan Sentra

Not finding what you are looking for?
2007 Nissan Versa 1.8 Sl Hatchback Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...