Question about 2000 Mercury Sable

1 Answer

Show me where the # 5 spark plug is located on a 2000 mercury sable

Spark plug locations

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Tell me where is #4 & #5 spark plug located at please .

Posted on Jan 09, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need spark plug gap for 94 Mercury Sable 3.0L

Listed in the owner's manual and under the hood on a placard. Also the parts store where you buy the plugs can supply this info.

Posted on Mar 18, 2009

  • 104 Answers

SOURCE: How do you access the spark plugs 2002 mercury mountaineer

IIRC these are a coil over design. meaning the coil is over the plug. the coil should have one 8mm bolt holding it on the lower intake manifold. remove the coild to get to the spark plugs. look by the fuel injectors, coil should be just next to it or very close. coil usually says motorcraft on it and circle in design.

good luck
Michael
ASE certified

Posted on Feb 09, 2009

  • 398 Answers

SOURCE: locating my spark plugs

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801edb28

Posted on Feb 26, 2009

  • 58 Answers

SOURCE: where are the spark plugs located on a 2000 Mercury Grand Marquis

There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.

Posted on Mar 30, 2010

  • 1757 Answers

SOURCE: digram of firing order for spark plugs, for 1991 mercury sable

For the 1991 Mercury Sable 3.8L V6:

Firing Order:
1-4-2-5-3-6
Cylinders:
.....(back)....
|...1...2...3...|
...................
|...4...5...6...|
......(front)
Distributor:
....(back)
......6..(+)-screw
1..........3
4..........5
(+)...2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plugs and wires 2005 mercury sable


What engine do you have, I will assume a DOHC V6, the DOHC V6 doesn't have spark plug wires, each spark plug (located under the igntion coil) has its own separate ignition coil, it is called direct ignition. You unbolt the coil and remove it with the attached spark plug boot and then you remove the spark plug from the cylinder and replace, do one at a time.

Nov 07, 2016 | Mercury Cars & Trucks

1 Answer

Trying to find out if 2000 Mercury Sable 3.0 ODHC has coil pack or individual coils ... and how to test / locate ... car sometimes hesitates and stutters


f a coil pack, you will have 6 spark plug wires coming out of a coil pack.

If individual, you will have no psark plug wire but a coil mounted above each spark plug

Aug 10, 2011 | 2000 Mercury Sable

1 Answer

What are the location of clyinder 1-6 on 96 sable


STANDING IN FRONT OF CAR TO THE LEFT ON PASSENGER SIDE CYLINDERS FACING YOU ARE 1 2 3 ON DRIVER SIDE CYLINDERS FACING YOU ARE 4 5 6 ALL THIS INFORMATION I GAVE YOU IS FOR THE 3.0L AND 3.2L DISTRIBUTORLESS ENGINE.WRITE BOTH NUMBERS I GIVE YOU 3 2 1 AND WRITE NUMBER 4 6 5 PUT NUMBER 321 ON TOP OF 465 THAT WILL BE SPARK PLUG WIRES LOCATION ON COILS.THEN ROUTE THEM TO THE CYLINDERS SPARK PLUGS.BESURE TO HOLD PAPER WITH NUMBERS I GAVE YOU NUMBERS STAND IN FRONT OF ENGINE SO YOU WONT MISLOCATE SPARK PLUG WIRES FROM COILS TO SPARK PLUGS.

Mar 06, 2011 | 1996 Mercury Sable

1 Answer

I would appreciate if u can show me are tell me how the spark plug wires go on a 2001 mercury sable i change the spark plugs and forgot how they go


FORD SABLE HAD TWO 3.0 ENGINES. ENGINE WITH CRANKSHAFT PULLEY FACING FRONT TOWARD RADIATOR AND GRILLE. CYLINDERS ON LEFT PASSENGER SIDE IS 1 2 3 CYLINDERS ON DRIVER SIDE THE RIGHT IS 4 5 6 GET PIECE OF PAPER WRITE NUMBER 321 AND WRITE UNDER THAT NUMBER THE NUMBER 456 STACK THEM NUMBERS ON TOP OF EACH OTHER THATS WHERE PLUGS WIRES LOCATION IS THE ROUTE THEM TO CYLINDER SPARK PLUGS NOW IF YOU HAVE THE 3.0 ENGINE TURNED SIDE WAYS.CYLINDERS FACING YOU 4 5 6 AND BACK CYLINDERS ARE 1 2 3 GET A PIECE OF PAPER WRITE NUMBER 456 THEN WRITE THIS NUMBER UNDER THAT NUMBER 321 WITH NUMBERS ON TOP OF EACH OTHER.LINED UP.THAT WILL BE YOUR SPARK PLUGS WIRES LOCATION.THEN ROUTE THEM TO THE CYLINDERS LIKE 1 TO 1 CYLINDER.

Feb 20, 2011 | Mercury Sable Cars & Trucks

1 Answer

What is the best way to change spark pluges in a 2000 sable v-6?


The best way is to remove each plug wire and plug one at a time, so as not to mess up the firing order.The spark plugs on the firewall side are a bear to get to but the only way to get to them is thru the top of the motor and a 5/8 wobbly spark plug socket does come in very handy for this by the way.Hope I could help, Rate me accordingly, Thanks!!

Oct 11, 2010 | 2000 Mercury Sable

1 Answer

Where is the fourth spark plug location


Is this a 4 cylinder engine or a V-6?If it's a 4 cylinder,it's going to be the last spark plug on the drivers side.If it's a V-6,it will be located in the back,towards the firewall,1st one on the passenger side.

Oct 06, 2010 | 2000 Mercury Sable

1 Answer

Digram of firing order for spark plugs, for 1991 mercury sable


For the 1991 Mercury Sable 3.8L V6:

Firing Order:
1-4-2-5-3-6
Cylinders:
.....(back)....
|...1...2...3...|
...................
|...4...5...6...|
......(front)
Distributor:
....(back)
......6..(+)-screw
1..........3
4..........5
(+)...2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 18, 2010 | 1991 Mercury Sable

2 Answers

Where are the spark plugs located on a 2000 Mercury grand Marquis?


There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.

Mar 30, 2010 | 2000 Mercury Grand Marquis

2 Answers

2ooo mercury sable turns over but will not start unless i spray in starter fluid


u are going to have to replace the electric fuel pump, the pump uis located inside the gas tank.

Aug 30, 2009 | 2000 Mercury Sable

2 Answers

2000 Mercury Sable 24V 3.o engine. Need to know


yes about the upper intake and the only way i know how to check the coils is with a engine anilyser or if the check engine light comes on then you can have the codes pulled and that will tell you which cylender is missfiring this engine has a indevidual coil for each spark plug so thares 6 of them and thay slide right down over the sparkplugs

May 05, 2009 | 2000 Mercury Sable

Not finding what you are looking for?
2000 Mercury Sable Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...