Question about Cars & Trucks

Open Question

How do i change a front fog light on a mitsubishi l200

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: fog lights

check the relay for the fog lamps as well as the fuse as well consider the possibility the bulbs are burnt out

Posted on Feb 25, 2009

leetamara
  • 702 Answers

SOURCE: my reversing lights dont work how do I change the bulb? Its a Mitsubishi L200

Remove the screws that attach the lense to the truck. Twist the bulb hold from the backside and remove the bulb. Installation is the reverse.

Posted on Jun 12, 2008

  • 840 Answers

SOURCE: I HAVE SMASHED MY FRONT FOG LIGHT

well you will have to go to the dealership and give them your vin order it and this is how you put it in take off the bottom sheild its retainered in or bolted in and then you should be able to get the light in . its really that eaasy

Posted on Jan 28, 2009

  • 119 Answers

SOURCE: front driver side fog light out

sounds like poor electrical contact around the bulb holder, or in the electrical plug to the foglamp unit. surface corosion to the terminals. try cleaning these contact surfaces with some emery tape or a very small screwdriver. you may also find bending the contacts very slightly in a way that makes them press harder against the bulb helps. if you have access to a test lamp check for a live feed to the contacts as well.

Posted on Nov 09, 2009

  • 112 Answers

SOURCE: when i turn my front fog lights on my L200 warrior

a short can be causing it wires can be touchin making ur sides lights come on instead of the fog lights

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi l200 warrior 2006 double cab. No indicators,fogs,main beam and headlights come on as soon as ignition is turned on? Please help. Thanks damion


sounds like the relay as its all the lights they sometimes stick find what one it is and remove it tap it alittle and replace if still no better replace it with a new one

Nov 10, 2013 | Cars & Trucks

1 Answer

Saxo rear fog light working and front fog lights not working


try changing the relay for the front fogs,the front and rear are not connected in any way,check the fuse box lid for relay location ok

Jan 29, 2012 | Citroen Saxo Cars & Trucks

1 Answer

L200 rear fog lamp


the fuse have you checked it.they could be a cut in the wire

Jan 13, 2012 | Mitsubishi L200 Cars & Trucks

1 Answer

How can I remove the fog light caps on my 2007 Eclipse so i can install the actuall fog light?


Most fog lamps are replaced on your back,
by reaching up under & behind the lamp
holder e.g. behind the front bumper fascia

Nothing to remove other than the lamp socket

Jun 29, 2011 | Mitsubishi Eclipse Cars & Trucks

1 Answer

How do you change the fog lights in a mitsubishi endeavor an 04


Most likely you have to get under the vehicle
& replace the lamp from behind the front
facia or bumper

May 23, 2011 | 2004 Mitsubishi Endeavor

1 Answer

When i turn my front fog lights on my L200 warrior pick up , the side lights come on instead of the fog lights . what causes this ?


a short can be causing it wires can be touchin making ur sides lights come on instead of the fog lights

Nov 14, 2009 | 1988 Mitsubishi Pickup

1 Answer

Need to change fog light bulb in my 97 mitsubishi 3000gt and cant figure out how to help please


Firstly remove undertray from front bumper approx 15-20 screws 2 of which are screwed into either side of the inner wheel arch near the bottom, you should then be able to see the back of the fog lamp. On the back of the fog lamp you will see a black circular shaped peice of plastic, turn this anti clockwise then remove, you will then see a metal clip holding the bulb in place this unclips from one side and you can then remove the bulb and replace with a new one.

Mar 05, 2009 | 1997 Mitsubishi 3000GT

1 Answer

Fog lights


check the relay for the fog lamps as well as the fuse as well consider the possibility the bulbs are burnt out

Feb 25, 2009 | 2003 Saturn L-Series

1 Answer

I HAVE SMASHED MY FRONT FOG LIGHT


well you will have to go to the dealership and give them your vin order it and this is how you put it in take off the bottom sheild its retainered in or bolted in and then you should be able to get the light in . its really that eaasy

Jan 27, 2009 | 1997 Mitsubishi Mirage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...