Question about 2001 Mercedes-Benz C-Class

Open Question

Cylinder headbolt torque settings for c270 cdi

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22095 Answers

SOURCE: Mercedes Benz C270 cdi 2001.

in the fuse panel top right side is a paper folded up this is the fuse layout diagram

Posted on Jan 22, 2010

  • 1 Answer

SOURCE: c270 cdi service manual required

what is the cost of a b-service

Posted on Sep 19, 2010

merctechniqu
  • 229 Answers

SOURCE: i need the torque settings for a sprinter 423 cdi

can you give me chassis no then i will post it tomorrow.

Posted on Oct 17, 2010

merctechniqu
  • 229 Answers

SOURCE: HI GEAR BOX WILL NOT KICK DOWN C270 CDI 02 THANKS

first check is the kick down switch working or not, as a first step, get in to the driver seat, don't switch on or start, press accelerator paddle slowly til end then depress and listen is it make a click sound or not, if not kick down switch could be faulty, this information for you to understand how the kick down switch working, when you drive the car did you depress and check the kick down working or not same as you did now? once again drive car and fully depress accelerator and check if not working you must get it in to the Mercedes workshop for right diagnose possibly faulty kick down switch in accelerator paddle, is this information helped you?

Posted on Oct 20, 2010

leedavidian
  • 1420 Answers

SOURCE: what are the cylinder head torque settings for a

Welcome to FIxYa.com


leedavidian.png


Regards, Lee Davidian


Thank you for using FixYa.com

Posted on Nov 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have changed cylinder head gasket and need the torque settings for the zd30 nissan engine


try this head torgue link.. that wont highlight

http://www.cylinderheadsaustralia.com.au/torque-settings

the ZD30 is listed half way down the list
and picture of tension sequence

HEAD BOLT TIGHTENING SEQUENCE.
• STEP ONE: 102Nm
• STEP TWO: Loosen All Bolts.
• STEP THREE: 44Nm
• STEP FOUR: +90*
• STEP FIVE: +90*
• IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
• USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS.




why are these torque setting and sequence
numbers no longer on the VRS head gasket packaging

Oct 28, 2016 | Nissan Cars & Trucks

1 Answer

What are the torque settings for Hyundai h100 cylinder head 2008 model?


Follow this link for the headbolt torques etc, click on torque tables and look up your vehicle
http://www.speedwayautoparts.com/index35.htm

Jul 15, 2016 | Hyundai Cars & Trucks

1 Answer

Cylinder head torque settings


Thread Head bolt torque and sequence
Read the threads, but it states:
According to my manual the removal and the replacement sequence are different. Removal (looking from the cam sprockets )
headbolt 1-3-9-5-7 are on the left and 2-4-10-9-8 are on the right. Remove in that progression.
Instillation 9-5-1-3-7 are on the left and 10-6-2-4-8 are on the right tighten in that order.
Tighten to 25Nm or 18 ft/lb. and retighten the cyl hd blt 70 deg plus 70 deg plus 50 deg using the angular torque guage KM-470-B.
Hope this helps. Might help to make a sketch and label the 5 headbolts on each side.

Sep 03, 2014 | 2005 Chevrolet Aveo

1 Answer

Need head bolts tourqe sequence for a 89 tercel


1989 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence809142031993 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence80914199they appear to be the same,other than the torque angle. good luck!

Oct 20, 2011 | 1993 Toyota Tercel

1 Answer

I need torque settings for Chev. 4.3 6 cyl for Rods, Mains, Headbolts, Cylinder Head, and Cam shaft timeing


http://www.torkspec.com/torkspecme.aspx?KI=12-4.3L-262ci-V6 Try this link out. It has various torque specs listed for the 4.3. Be sure to check the years to ensure it is the proper torque spec for your vehicle. Also this may not have all the torque specs you asked for, but I believe it has most of them.

Jul 22, 2011 | Chevrolet S 10 Cars & Trucks

2 Answers

Mercedes Benz C270 cdi 2001. What is the fuse number for the driver's seat recliner please.


in the fuse panel top right side is a paper folded up this is the fuse layout diagram

Jan 22, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

Hi im a mechanic... I have a 2000 Deville with a northstar. Radiator, waterpump, thermostat, are all changed and good. There are no external leaks. I heard the Northstar motors have problems with there...


What happens is the head gaskets shrink causing the headbolts to loose torgue, and the headbolts are of one time use, whenever you do a headgasket job you will need to replace all the headbolts with new ones. and when ever you remove a cylinder head on any engine you should always chase the bolt holes with the proper tap, then blow out the holes with compressed air, this will help to insure a more accurate torque setting on the new headbolts...

Oct 01, 2009 | 2001 Cadillac DeVille

1 Answer

Cylinder head bolt torque


Torque all headbolts to 29 ft lbs with a good and accurate torque wrench, then tighten them further in two steps 90 Degrees per step. But if you've replaced the head bolts with new ones tighten them and additional 90 Degrees.

May 22, 2009 | 2006 Honda CR-V

1 Answer

Head bolt toqure


Hope this helps, from autozone site. Curt
Application:
Cylinder head bolt torque sequence

Note :
Torque sequence:
---------
front | 3 1 6 |
of | |
vehicle | 5 2 4 |
---------
Step 1: Lightly oil cylinder bolt threads & washers
Step 2: Torque to 22 Ft/Lbs
Step 3: Torque to 51 Ft/Lbs
Step 4: Loosen all bolts 180 degrees
Step 5: Loosen all bolts 180 degrees
Step 6: Torque bolts 1 & 2 to 25 Ft/Lbs
Step 7: Torque bolts 3, 4, 5, 6 to 11 Ft/Lbs
Step 8: Turn all bolts an additional 80 to 90 degrees
Step 9: Turn all bolts an additional 80 to 90 degrees
*** CAUTION ***
engine uses Torque To Yield head bolts (TTY) that
permanently stretch during the initial installation.
New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper Torque.

Apr 24, 2009 | 1995 Subaru Legacy

Not finding what you are looking for?
2001 Mercedes-Benz C-Class Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...