Question about 1990 Acura Integra

Open Question

90 acura integra wont shift into third gear until i drive it for ten minutes then it shifts fine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: Gear shifting problem

The 1st thing to do is have a test run on the transmission control module to see if any trouble codes are present, next have you ever serviced the transmission, fluid and filter change, should be done at 60,000 miles, on occasion this can cure problems like yours.

Posted on Nov 06, 2008

Ad
jonbrown725
  • 73 Answers

SOURCE: shifting gear(Acura Integra 95) gets stuck on P.

The switch should lock the shifter in park . And you should need a key to release it. It is a child safe safety that has been installed since the 70's on all US sold auto's.

Posted on Jan 17, 2009

  • 1 Answer

SOURCE: problems with my acura 3.2 cl not shifting

i had the same problem with my 3.2 cl type-s they had to change out some gears and replace a lot of parts in my transmission. it cost about 2500 to fix thru aamco

Posted on Apr 01, 2009

motor1258
  • 6674 Answers

SOURCE: Runs 5 minutes then dies. Won't start until engine is cold.

Try the WD-40 spray in intake of throttle body with air intake hose off, to see if it will kick at all, even for a second or 2. We need to confirm whether your losing fuel or spark when it dies. Ignition & fuel, can cause similar symptoms in this case.

Posted on Apr 20, 2009

  • 13 Answers

SOURCE: My gear shift will not move.

look in the car's owner manual and it has a way to take of the shift lock with a screwdriver.

Posted on Jun 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acura Integra 1.8L automatic transmission wont shift gears? its like its stuck in first?


Does the engine accelerate okay? Shifting to any other gear help? Check the transmission fliud level, if it is full (and brown or black) you need a rebuild, if it is low add fluid to full mark and try again.

Apr 04, 2013 | Acura Cars & Trucks

1 Answer

I am needing to replace a solenoid on my 1992 acura integra but not sure what solenoid I am looking for. It isn't wanting to shift into higher gear when I accelerate at higher speeds


it may not be a solenoid--but dirty fluid or filter or even level--mite be a computer control issue too--have car scanned and a data stream run that shows in detail--a test drive by an experienced tech helps but dont fall fora rebuild cause trans can last to 300 thou miles

Dec 02, 2011 | 1992 Acura Integra Hatchback

1 Answer

99 acura drives slow w/ no tranny shift & no speed-o-meter


Vehicle Speed Sensor (VSS) or check the transmission control module for burned capacitors, etc.

Sep 26, 2009 | 1999 Acura Integra

1 Answer

Engine speed hunts on idle. Auto trans slow shift.


The fast idle valve is inside the throttle body. Sometimes it backs out and needs turned back in (it's threaded). This will cause the loping idle.

Get transmission filter changed with new fluid. Honda does not recommend transmission flushing.

Sep 17, 2009 | 1988 Honda Accord 4 Door

1 Answer

93 integra automatic transmission when its on i cant put in to gear like revers or drive i have to put the keep an unlock the gears why is that???


It's a safety feature called shift interlock control. You need to start the car and depress the brake before you are able to put it into gear.

Jul 31, 2009 | 1993 Acura Integra Hatchback

2 Answers

MY TRANS WONT SHIFT INTO THIRD GEAR UNTIL IM DOING 45 MPH IT SHIFTS FINE IN FIRST AND SECOND GEAR WHEN IT IS IN SECOND GEAR AND WONT SHIFT TO THIRD I CAN PUT IT IN N AND BACK TO OVERDRIVE THEN IT SHIFTS.


Most likely your shift cable (from the selector to the transmission) is worn, maybe needs lubrication. Mine had a similiar problem, but had to shift it into neutral and back up to get it in reverse. A new shift cable solved the problem.

Jul 27, 2009 | Lincoln Town Car Cars & Trucks

1 Answer

Shifting gear(Acura Integra 95) gets stuck on P.


The switch should lock the shifter in park . And you should need a key to release it. It is a child safe safety that has been installed since the 70's on all US sold auto's.

Jan 17, 2009 | 1995 Acura Integra Coupe

Not finding what you are looking for?
1990 Acura Integra Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...