Question about 2007 Subaru Forester Sports 2.5XT

Open Question

Need to replace the front bumper on a 2007 subaru forester

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Subaru Forester window air leak

take out the tweeder covers if you have tweeders or remove the triangle covers were the tweeders woud be ,then stuff a klittle foam in their,worked for me

Posted on Mar 14, 2009

jigsaw_9077
  • 308 Answers

SOURCE: 2003 Subaru Forester X Dash Lights out

just follow the wires that cnnect to the speedometer light and screw to change bulb . thesame as to the tachnometer light there also is awire connected to it .

Posted on Jun 22, 2009

  • 119 Answers

SOURCE: Procedure for replacing rear wheel bearings 2000 Forester

i'm assuming you don't have a hubshark,this is a tool that will alllow you to remove the bearing while the knuckle is attached to the car,you may be able to rent this tool at a auto prts store .if not you need to remove the entie knuckle,first remove the trailing arm bolt,then the lateral link bolt{long and stubborn bolt},disassemble the brake shoes and parking brake cable,abs sensor if equipped the knuckle to strut bolt{no marking necessary they are not eccentric} then you need a to use or borrow a press to remove hub and bearings good luck

Posted on Jul 26, 2009

  • 1986 Answers

SOURCE: Installing replacement side mirror on 2007 Subaru Forester

yes... you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can access the bolts holding the mirror on and disconnect the wiring harness as well..

Posted on Aug 20, 2009

  • 10 Answers

SOURCE: 2000 subaru forester ignition coil wiring

Are there any other possible problems, or you are just not receiving spark at all now?

The coilpack could be dead and just need replaced. If you have a voltmeter or a test light, check the wiring on both sides of the coilpack harness to make sure it is receiving power.
I don't believe Subaru used ignitors past '99, but if they did, your should be located on the firewall behind the throttle body. Make sure it's plugged in and receiving power.

Coil packs do go bad from time to time. I had to replace mine in my
'98 Impreza a while back.

Goodluck!

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the outside air temperature sensor located on a 2005 subaru forester


they are mounted to the lower radiator support rail. You have to remove the bumper cover (read plastic outside bumper) to replace them.

May 21, 2014 | 2005 Subaru Forester

1 Answer

Intake air temperature sensor located


On the air inlett from the front bumper to the intake manifold,should have a sensor with cables

Oct 19, 2013 | Subaru Forester Cars & Trucks

1 Answer

How to change front wheel hub on 2002 forester


All models are about the same as far as the front wheel bearings go, so go to this link for a how to on the replacement of the front hub.

Sep 25, 2012 | 2001 Subaru Forester

1 Answer

Maintenance check points for 24,000 miles 2007 2.5x subaru forester?


MAINTENANCE SCHEDULE WAS DUE 22500 SERVICE AND INSPECT AIR CONDITIONER FILTER / REPLACE ENGINE OIL AND FILTER / SERVICE INSPECT TIRE ROTATION. NEXT SCHEDULE MAINTENANCE DUE IS 30000.

Aug 19, 2010 | 2007 Subaru Forester 2.5X L.L. Bean...

1 Answer

Front end of 2007 subaru forester shakes when brakes brakes are applied to slow car


REsurface or replace your rotors and be certain to correctly install wheels, to avoid redamaging rotors.

Aug 01, 2010 | 2007 Subaru Forester Sports 2.5XT

1 Answer

Installing replacement side mirror on 2007 Subaru Forester


yes... you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can access the bolts holding the mirror on and disconnect the wiring harness as well..

Aug 20, 2009 | 2007 Subaru Forester 2.5X L.L. Bean...

2 Answers

How do i replace the fog light on a 2005 subaru forester


Hi there! You have to remove the plastic under the car bumper and then slip your hand up there to remove the bulb. On some cars you can remove the 10mm blts that hold the assembly in from the front,then take the assembly out and access the bulb.

Jun 15, 2009 | 2005 Subaru Forester

Not finding what you are looking for?
2007 Subaru Forester Sports 2.5XT Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...