Question about 2000 Chrysler 300M

Open Question

2000 chrysler 300m drivers door lock wont pull up to unlock

If i pull inside door handle to open and at same time pull up on door lock it opens pressure is still on knob to down lock position

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bunnydawg
  • 5158 Answers

SOURCE: 2002 Chrysler T&C sliding door won't UNLOCK w/ Switch or Key FOB

the other locks work correctly.

quick fix is to clean the contacts that the door makes when you close it. there are contacts on the door pillar (probably look like little copper circles) on the door itself there will be some spring loaded contacts... make sure they work freely and are clean.

Robert

Posted on Sep 08, 2008

Ad
  • 76 Answers

SOURCE: 2000 town and country van back door will not unlock

sounds like the lock is seized, you will have to remove the panel,it's held on with screws and snap plugs, remove all the screws and then gently pull the panel off. you will be able to open the hatch by sliding the lever sideways. the latch and mechanical lock are the same unit. it has a electrical actuator. your dealer or regular tech sould be of great help in this very simple matter.

Posted on Nov 18, 2008

  • 56 Answers

SOURCE: Passenger Door won't open from inside - not child safety lock

as leegallacher said its more than likely the interior door cable stretched or ends worn.

Posted on Jun 26, 2009

Testimonial: "That was the problem."

  • 4044 Answers

SOURCE: 1999 chrysler 300m wont crank, code P0340

Sounds like the timing belt broke. Unfortunately this vehicle was not equiped with no contact valves so if that is the case you will need to have the engine and Head rebuilt. If the crank position sensor can't sense the position of the crank it should shutdown the electrical to keep you from damaging your engine.

Posted on Oct 09, 2009

  • 1 Answer

SOURCE: my 2002 chrysler concorde door handle has lost all

My concorde 2003, both right side locks wont open from inside. The front one has broken handle and the rear one is without any tension.

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I locked the door latch maualy at the door of 2000 ford explorer how do release it


Look into the lock opening on the door frame for a part you can reach with a flat-blade screwdriver.
These can normally be opened if prying on the lock mechanism.

If you want to risk another door, watch the mechanism move when locking it manually.
You should then be able to reset both.

Mar 14, 2015 | 2000 Ford Explorer

1 Answer

2001 BMW X5 Unlocked driver door wont open from inside or outside


handles may be in good condition but the lever on the latch itself may have came loose. your mostlikley looking at dismantelling the apolsery with the door closed to rectify it.

Apr 21, 2013 | 2001 BMW X5 3.0i

1 Answer

Driver Door Issues


Try replacing the unlock switch on door

Feb 20, 2013 | 1997 Ford Explorer AWD

1 Answer

Mazda 6 2005 driver door jammed


if you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Jan 04, 2013 | 2004 Mazda 6 Sport

1 Answer

My 2002 chrysler concorde door handle has lost all tension and will not open the door from the inside. any advice??


My concorde 2003, both right side locks wont open from inside. The front one has broken handle and the rear one is without any tension.

Oct 05, 2010 | 2000 Chrysler Concorde

1 Answer

2000 Clio-Open door with key,lift handle,other doors not unlockin


The door sensor is the problem. Have it tested, they are a known issue.

Jul 11, 2017 | 2000 Renault 181

2 Answers

Chrysler passanger door problem...


I had the same problem with my Honda Civic a couple months ago. There could be a problem with the bell crank, the part that keeps the door shut. It could be broken or just not working right, and that's probably why your having problems opening and closing your door. You can take it to your Chrysler dealership or to a paint and body shop to get it repaired.

Aug 25, 2009 | 2000 Chrysler 300M

1 Answer

My driver side door wont open how do i get it


sounds like the door lach is sticking
use some wd40 spray the lock and let it sit 4 a while
now since you have the inside skin off reach inside the door with 1 hand and try and open the door from the outside and see if the lock bar moves it usualy pushes down i think on a lach
if it goes up and down with no resistance make sure it is contacting the lach if yes make sure the door is unlocked
somtimes the lock is just stuck
after unlock open the door
push down on lock bar attached to lock then pull up on it if that fails to open door
after that all fails unlock door have friend pull handle and then give the door a good kick from inside just remember not the kick the glass

Jun 25, 2009 | 1998 Mercury Mystique

1 Answer

Door lock


Front door panel or rear? Either way there are screws on the very bottom of the panel, behind a tab in the handle (open door) recess, one in the handle you use to pull your door shut, one in each of three hole in the front middle when the door is open (front door). Take off the tweeter speaker. There might be a couple I missed, but study the door to find all screws and then you can pull the panel out a little then up. The lock tab, open handle, etc. are still connected so don't pull too hard. 
rate the solution as per the help u received and feel free for the further queries. thanks.

Jan 02, 2009 | 2000 Chrysler 300M

Not finding what you are looking for?
2000 Chrysler 300M Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...