Question about Toyota Cars & Trucks

Open Question

1991 camry fusible link on positive battery terminal 3 fuses red middle one broken

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 04 Tahoe blowing fusible link in fuse box for starter

ON the fuse box cover.
IS there a especification for the funtion of the fuse. or the number of the location of the fuse.
If you can give me, I can try help you. as more I can.

Thank you for use fixya.

Posted on Jul 24, 2008

  • 243 Answers

SOURCE: Fusabl iink on Positive battery terminal??? how to change it >>

There should be two small 8mm bolts holding the fusible link by the sides...don't pull the fusible link before unscrewing the 2 bolts as they will damage the holder.

Posted on Oct 29, 2008

  • 35 Answers

SOURCE: Jump start with a 2005 Cayenne

yes the red thing is posative connect the negative (black) to any solid metal or the alt mounts work best then you got power

Posted on Mar 30, 2009

  • 2 Answers


Jeep got rid of Fusible links by 1999. All the fuses that in the past would be Fusible Links are now in the Power Distribution Center in the engine, as Maxi-Fuses. However you could have an after market modification that would include a Fusible Link. That said, make sure you have a good charge on the battery before starting, it doesn't seem like a big deal....but it could make a difference.

Posted on Apr 19, 2009

  • 1 Answer

SOURCE: Wire Gauge Fusible Link

Replace the fusible links with ALF fuses, I put 20 amp on each side and a 30 amp in the center

Posted on May 20, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there a fusable link that would keep the alternator from charging battery in a 1991 chevy corsica

Yes, I believe that would be a fusible link, rather than a large fuse (maxi-fuse) used on later models. The fusible links will tie into the positive battery cable somewhere. If not at the battery, then look for them where the positive cable connects to the starter. A bad fusible link will look like some of the insulation melted, may have bumps and bulges where the fusible link blew out. To replace a link, you cut it out and solder in a new link of the same rating.

Nov 20, 2016 | Cars & Trucks

1 Answer

Where is the main fuse for a 1994 toyota camery

Trace the heavy wire connected to the positive terminal of the battery until you find it. Look for a bump in the line that contains an inline fusible link

Feb 08, 2013 | 1994 Toyota Camry

2 Answers

While driving 1991 chevy cavalier gauges went wacko started cutting out lost charge in battery and died.Checked battery and alternator and both are fine.What should i check next?

Check all ground connectios first, make sure they are clean and tight, then check positive connections, use an ohm meter if possible. MAKE SURE YOU DIS-CONNECT THE BATTERY WHEN USING AN OHM METER.. Thanks Ray

May 28, 2011 | 1991 Chevrolet Cavalier

1 Answer

I have 1985 ford f150 5.0 v8 the starter soleniod wires got bat,starter and the 4 fusible linked wires are my problem which side do they go and how many on each post 1 red,1 blkandorg,2 yllw which are...

On the battery side should be the blk/org (alternator wire) and yel/blk-w/fusible link with of course the positive battery cable, On the other big terminal should be the other yellows, for your small terminal marked with an "i" should be the red/blue if it has the small terminal, if not on the big terminal opposite of the battery.

Mar 19, 2011 | Ford F-100 Cars & Trucks

3 Answers

No electrical current from battery where are fusible links

I realize this is a very old post, but I just encountered the same juice at all to ignition from battery......the problem was the 3 weird looking fuses attached to the positive battery cable. I replaced all 3 for about $12.00 and she fired right up. Some models have a fuse box/panel....mine does not, and these 3 fuses are critical for getting current to the ignition.
I'm sure by now you have it figured out, but for anyone in the future, this may help.

Nov 25, 2010 | 1985 Mitsubishi Mighty Max

1 Answer

Where is the fusible link for 1999 dodge ram

I know that fusible links on GM cars come directly off of the starter positive terminal. They can be identified by looking for a cylindrical (3/4" long by 1/2" in diameter) barrel of plastic on a colored piece of wire. If the technician pulls on a fusible link which is about 8" long (replacement), then the wire insulation will stretch by about 1" to 3" indicating the wire inside has broken.
I looked up fusible link on the 1999 Dodge Ram and came up with this information which is a little bit different as far as form factor:

Fusible Links Removal & Installation All Engines To Remove:
NOTE: If a generator cartridge fuse fails, be certain to inspect and test the vehicle charging system before replacing the cartridge fuse and returning the vehicle to service.
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The negative battery cable
    • The cover from the Power Distribution Center (PDC)
    • The two screws securing the generator cartridge fuse to the two B(+) terminal stud bus bars within the PDC
    • The generator cartridge fuse from the PDC
To Install:
  1. Install or connect the following:
    • The generator cartridge fuse onto the two B(+) terminal stud bus bars within the PDC
    • The two screws securing the generator cartridge fuse to the two B(+) terminal stud bus bars within the PDC
    • Tighten the screws
      1. Torque to: 30 in. lbs. (3.4 Nm)
      NOTE: Ensure that both screws are tightened to the proper torque values.
    • The cover onto the PDC
    • The negative battery cable
prev.gif next.gif

Oct 08, 2010 | Dodge Ram 1500 Cars & Trucks

2 Answers

1992 Toyota Camry won't crank

Check the ground cable going from the battery to
alternator, then to chassis. Make sure there is no
rust at the chassis ground wire terminal, and that it
is very tight. The fusible link will be off the alternator
red power cable,usually, but not 100% on that car.
Good luck.

Mar 30, 2010 | 1992 Toyota Camry V6

2 Answers

While installing a new battery I touched the distributor cover and the positive terminal with my wrench. I can't find any blown fuses but I have no power to my ignition, headlights, or anything else. What...

i think your problem is at the battery terminals especially with the headlights. on the positive side should have several wires connecting to post check them.

Jan 05, 2010 | 1991 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides