Question about Cars & Trucks

Open Question

I need to remove the ignition barrel of my 1994 ford festiva.. I have been told to puncture out two snap off screws ( to be replaced) but I can't find where they are.. Anyone done this before?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3422 Answers

SOURCE: broken ignition barrel ford laser 1989 model

Hi,

this is the procedure to remove the ignition barrel:

Remove the steering column surround and you should see a black round thing on the left hand side, this is the ignition switch. Remove this and you will see there is one screw holding the ignition barrel on, remove and you then need to insert your key and turn it to the ACC position. you should now be able to withdraw the barrel using the key but take care not to snap the key off in the barrel.

Please don't forget to rate or accept the solution as fixya.

Goodluck..

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove ignition lock cylinder


Remove the ignition lock cover, there is a release button at the end of the lock cylinder, push in with a flat tip screw driver and turn key to the "on" position but don't start car, pull cylinder out with key.

Jan 12, 2014 | 1993 Ford Festiva

6 Answers

Broken ignition barrel ford laser 1989 model


you your self can do it its simple do not call an technician. i will definatly guide you just let me know from where it is exactly broken.

Jun 15, 2008 | Ford Laser Cars & Trucks

1 Answer

Replace ignition barrel with a snapped metal intrument in it


you can try to remove said instrument with plyers, easiest way for me to fix a car like that is to replace the whole dang steering column. To replace the keyswitch only, check out this video, it applys to your car too! http://www.youtuberepeater.com/watch?v=oFsQhk-QQS8&name=toyota+corolla+ignition+lock+cylinder+and+key+switch+replacement

Dec 16, 2013 | 1996 Toyota 4Runner

1 Answer

Ignition tumbler pin sheared off inside, don't know how to get it out. - 1998 ford windstar


Hi AJ, You'll need to remove the ignition barrel and take it to a lock smith. To remove the barrel look underneath the plastic cowling around the steering column and you will see holes recessed into it. Remove the screws with a star (Phillips screw driver) and then remove the cowling.. Unplug the ignition switch at the connection (follow the cables downward to the multi connector) and then look at the saddle clamp which holds the unit in position. The bolts are "blind bolts' which will need to be removed. I suggest using a cold chisel or cutting slots for a flat screw driver to fit. Once removed the barrel can be removed. Regards John

Jun 24, 2012 | 1998 Ford Windstar

1 Answer

How do you remove the ignition switch on a ford 250 1994 model?


Do you mean the key and tumbler, or the switch down on the bottom of the steering column? If you mean the switch, just lower your steering column by removing the cover at the bottom of the dash, and then remove the 2 bolts on either side of the column. The switch is near the base of the column, and the rod that runs from the ignition switch goes into it.
If you mean the key and tumbler, you have to pull the steering wheel, remove the screws from the signal cam, and then remove the locking bolt that holds the tumbler. You will need a steering wheel puller to remove the snap ring, and to reinstall.

Sep 04, 2010 | 1994 Ford F250 Supercab

1 Answer

1991 ford festiva replaced alternator new


it is part of the alternator actually on a lucas unit, a small black box bolted to the rear of the alternator.

You may have a faulty ignition switch or a corroded engine earth cable causing the alternator not to reach charging voltage.

Jan 13, 2010 | 1991 Ford Festiva

1 Answer

How do i remove the headlight on a 1990 ford festiva ?


The headlight is easy to remove once you know the trick. That is that you first have to remove the grill in the middle. Look in the back and you will see how the grill is attached and you can remove that first. Then you will have easy access to the 4 screws around the outside of the headlight frame. Remove those screws and turn the bulb ring 1/4 turn counter-clockwise and pull to remove bulb unit. Now you can remove the lamp. To replace, reverse removal procedure. Do not touch the bulb or oils from your finger will cause to it not last long.

Aug 05, 2009 | 1990 Ford Festiva

2 Answers

Ford festiva indicator light replacement


take cover off at lights inside the boot,there are two clips on the taillight squeeze them and the bulb unit should come off

Jul 16, 2009 | 1993 Ford Festiva

1 Answer

Installing door handle ford festiva 1995


The Festiva door handle is very easy to replace. It is bolted on with phillips head screws that screw into the door. Simply remove the old one and use the same screws on the new one. Maybe you meant the handle that you pull to open the door? To replace that one you have to remove the door panel and then you can see the phillips screws to release it and then jusy unhook the rods and replace the new on the same way the old one came off.

May 02, 2009 | 1990 Ford Festiva

1 Answer

Ford festiva 1994


should be fill plug on front side of trans axle obout half way up the trans axle

Jul 27, 2008 | 1993 Ford Festiva

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...