Question about 1995 Jeep Wrangler

1 Answer

89 jeep wrangler 4wd problem

How do you get the actuator off of the front drive shaft,I can't get it to un screw.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

The float in the tank is probably stuck or gummed up. Try a can of sea foam or Chem tool and checking for broken lead wires before removing the tank.

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My transfer case spins when put into 4x4 but wheels don't lock into 4x4 on 96 jeep wrangler. Any idea why?


first , is the front prop shaft spinning, in 4wd
if yes, the front axle locks are bad.
if not , the transfer case , is not entering 4wd

Feb 17, 2015 | Jeep Cars & Trucks

1 Answer

My 89 jeep wrangler islander only drives in 4 Lo. If I put in 2 hi it clanks and I can hear the gears grind. First gear works decent but once you switch to second you can hear it grind again. What could my...


old dog , jeep, sure.
its a PART TIME 4wd, not AWD.
you post but forget (100s like this here) with no road surface stated.
dirt, ice, snow, off road, pavement. what??

my wild guess, is this car is new, to you,
and you never read the operators guide yet.
lost 25 years ago, but sold on fleabay
PT-4wD
do not drive on pavement dry , or you WILL wind it up.
WHEN I SAY 4wd I MEAN , the front lockers are locked AND
the transfer case is in 4wd.

Here is the best page on the net for PT-4WD
here we go , WINDUP. 101

http://www.rubicon-trail.com/4WD101/driveline-bind.html

answer, is , DONT DO That.

Mar 31, 2014 | 1988 Jeep Wrangler

1 Answer

How does the vacume lines engage the four wheel drive in a 89 wrangler


the line dont really engage the the transfer case, the engage the half shaft on the frount axel. the passenger side axel on the frount. theres a small box on the tube, inside is an actuator and a pikle fork that slides a ring onto the half shaft to engage the frount axel. this is done to improve turnig radus in 2 wd. the actuator goes out or gets stuck. you can check the lines and all that but on my jeep i removed the cover and used zip ties on the actuator rod to prevent it from disengaging. lost a little bit of turning but gained my 4wd back. for free. there are kits that replace this vacume system with a cable system but there expensive. just remeber jeep can stand for two things. Just Empty Every Poket or Just Enough Essental Parts. good luck and good wheeling

Jul 20, 2011 | 1989 Jeep Wrangler

2 Answers

95 Jeep Wrangler. When select 4wd lo or high,


there is a vacumn shift motor on your front passenger side axle. these are notorious for problems. check it to make sure it is working.

Feb 03, 2010 | 1992 Jeep Wrangler

1 Answer

1991 jeep wrangler front drive shaft isnt turning. Once in a while gears will grind but front diff isnt working


you have a vacumn actuator on the passenger side front axle tube that engages your front axle when put in four wheel drive. those are notorious for not working

Feb 01, 2010 | 1992 Jeep Wrangler

1 Answer

92 wrangler wont go into four wheel


If you have an actuator box on the passenger front axle that may be disconnected or broken. If not remove the cover from the front differential and check the gears...they may be broken.

Jan 13, 2010 | 1992 Jeep Wrangler

1 Answer

I have a 1987 jeep wrangler and it will not shift into 4 wheel dr


The front axle connects 4wd by vacuum. check the vacuum hoses that run to the actuator. Pay close attention to the vacuum hoses running underneath the battery as battery acid can eat thru those hose easily. Good Luck.

Dec 27, 2009 | 1987 Jeep Wrangler

1 Answer

1990 Jeep Wrangler 4WD won't engage.


Most likely the vaccum actuator...If that works fine, you COULD have a stuck shift fork in the front differential...unlikely though

Aug 18, 2009 | 1990 Jeep Wrangler

1 Answer

1987 Jeep YJ [Wrangler] so owner ship says''


Our Jeep Wrangler YJ's are equipped with a vacuum module on the front axle. It is used to engage the front axle when the transfercase is shifted into 4WD. Check the vacuum lines on the front axle to make sure they are connected. The passenger side axle shaft has a disconnect sleeve that is moved left and right by the vacuum.

Mar 01, 2009 | 1987 Jeep Wrangler

1 Answer

Front wheel will not engage for 4 wheel drive


very possible. Put your jeep on 4 jackstands and put in 4 wheel drive. if the front drive shaft turns pull the vacuum disconnect and check the shift fork. They usually break before the shift actuator.

Jun 28, 2008 | 1992 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...