Question about Nissan Cars & Trucks
Both light went bright then stopped working, fuse ok
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i would check the connectors under the dash they have a tendancy to get loose are get hot and short a fuse this is most likely the problem...please rate this....
Posted on Sep 01, 2008
I took my pathfinder to U-HAUL and asked them to check the towing lights. There was a pinched wire by my tail light and they cut it and changed it out for me, it was $5. I am so glad that I didnt take it to Nissan. My second step was going to be getting a new dimmer switch..but the guy who worked on my car said that wouldnt be the problem. He also told me that replacing a fuse that kept blowing out was dangerous and after the first time to get it checked out. Learn something new every day!!
Posted on Sep 12, 2008
SOURCE: 1998 monte carlo brake lights
I have the same problem,it's the switch inside the turn signal
assembly.Unfortunately the entire assembly switch and all has to be
Hope this helps.
Posted on Dec 01, 2008
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
Posted on Feb 17, 2009
Tips for a great answer:
Oct 20, 2015 | 1987 Nissan Pathfinder
Aug 31, 2015 | 2005 Nissan Armada SE
Nov 15, 2010 | 2000 Nissan Frontier
Sep 03, 2010 | 2004 Nissan 350Z
Jul 30, 2010 | 1999 Nissan Altima
Feb 15, 2010 | 2005 Chevrolet Impala
Jun 09, 2009 | 2004 Nissan Armada
Dec 26, 2008 | 2000 Nissan Frontier
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: