Question about Chevrolet Camaro

Open Question

How do you replace a heater core on a 1995 3.4 liter Camaro RS?

Heater Core

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1596 Answers

SOURCE: replacing heater core

  1. Allow engine to cool and release pressure from system, then disconnect heater hoses from heater core tubes, and plug hoses.
  2. Working in passenger compartment, remove glove compartment assembly.
  3. Remove seven screws attaching the heater core access cover to plenum chamber.
  4. Disconnect vacuum lines, then remove the cover with the vacuum harness attached
    1. Remove heater core from vehicle, Fig. 20.
    2. Reverse procedure to install.
If you would like the 1 pic that comes with Email me at my Nickname here @aol.com AND PLEASE HELP ME BY a Simple Click to RATE ME Have a GREAT WEEK & THANK YOU !!!!!!!

Posted on Jan 21, 2009

  • 82 Answers

SOURCE: bad heater core

look undre the passenger side dash and you will see a black box. Look closely and you will see screws in it around the edges. remove all the screws then remove the cover,there is the heater core, held in by 1 screw that is kinda hard to see. next look under the hood on the passenger side firewall right in front of the dash, you will see 2 hoses with clamps on them. loosen the clamps and remove the hoses. you may want to drain the radiator first but I never do

Posted on May 05, 2009

  • 323 Answers

SOURCE: 1999 dodge durango heater core

It's a big job. Drain the coolant down, recover the freon in the ac system and disconnect the lines and heater hoses. Lower the steering column, remove the instrument panel assembly, remove the heater housing. Split the case halves on the housing and there you are. Usually around 500 to 700 dollars at a dealership.

Posted on May 29, 2009

  • 691 Answers

SOURCE: 1995 corvette heater core replacement cost estimate

225.00 bucks including parts labor, you might find a local mechanic will do it for 100.00 buck for labor and you buy the part 49.00 buck. lots of GM mechanic are laid off and economy is slow and you might want to advertise on craig list needing GM mechanic. my best secrets is drive back to the GM garage and ask any mechanic who does the side work and you will be surprise. keep in mind dont ask the shop manager, believed me every dealership has one or more does a side job and good price, no shop rate. hope that help some good luck.

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 Camaro Z28 appears to be leaking antifreeze from the hose or hoses that run to the heater core. The hoses are rubber but appear to connect to metal lines then back to rubber before they go into the...


if your rubber hoses are cracked and leaking then replace the hoses with proper size and length.
if the hoses are leaking where they connect to the metal fittings from the heater core then try and tighten up the hose clamps -- they could just be loose.

c...

Jan 04, 2011 | 1995 Chevrolet Camaro

2 Answers

How to replace the heater core in a 1995 buick regal


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 28, 2010 | 1995 Buick Regal

1 Answer

Why does my 1995 chevy camaro not blow out hot air? i've changed the thermostat, it has a new radiator and hose, and new water pump. the heater core seems to be fine.


use your hand on both hoses into and out of the heater core to see that they are hot. if not the core is plugged and needs to be replaced. before you do that squeeze the hose upper and lower and the heater core hoses to make sure there is no air trapped in the system. be very very careful of the fan while you are doing this.

Nov 26, 2010 | 1995 Chevrolet Camaro

1 Answer

How to uninstall heater core from 2002 camaro


Drain the engine coolant. Refer to Draining and Filling Cooling System in Engine Cooling.
Remove the heater hoses..
Remove the heater core tube clamp bolt.
Remove the heater core tube clamp.
Remove the heater core shroud seal.
Remove the heater rear case bolts (Remove the heater rear case.
Slide the heater rear case downward in order to disengage the upper case clip.
Remove the heater rear case.
Remove the instrument panel (IP) compartment door. Refer to Door Replacement - Instrument Panel (I/P) Compartment .
Remove the heater core clamp bolt
Remove the heater core clamp.
Remove the heater core

Feb 25, 2010 | 2002 Chevrolet Camaro

1 Answer

I have a 1990 Camaro, I had the heater disconnected - cost was $150, they said to replace it with a new heater would be over $800 - is this a fair price ?- The car is not worth more than $1,000


if you mean to replace a heater core,
the heater core is about $40.00 from Autozone,So the $150.00 is labor,this job can be done in one hour and at shop rates today that would be $50.00,
you need to buy the heater core yourself and find another shop.

Jan 23, 2010 | 1990 Chevrolet Camaro

1 Answer

I need to know how to route and hook up the hoses from the heater core to the motor on a 1989 rs camaro, v-6, w/ac


does not matter which goes where on the heater core one from water pump straight to heater core and the other comes from the intake manifold, they both travel below the passenger side valve cover.

Jan 15, 2010 | 1989 Chevrolet Camaro

1 Answer

What is the hose diagrahm for a 91 rs camaro with a 305 small block


John..... need to know how the heater core hoses are routed and where to hhok up on 1989 camaro rs, v-6, w/ac

Nov 04, 2009 | 1991 Chevrolet Camaro

1 Answer

1995 camaro hvac motor location


  1. Drain the engine coolant into a suitable container.
  2. Open the instrument panel glove compartment. Push in on the sides of the compartment to release it, allowing access to the heater core.
The heater core can be damaged if too much force is applied to the heater core pipes during hose removal.
  1. Remove the heater module screws and remove the heater module assembly cover. For vehicles equipped with A/C, remove the air conditioning evaporator temperature sensor assembly from the heater and A/C cover.
  2. Remove the heater core screw and clamp.
  3. Remove the hose pipe clamp screw and the hose pipe clamp. Clamp off the heater hoses.
0900c152800b8721.jpgFig. 1: Heater hose and pipe routing-3.4L engine 0900c152800b8722.jpgFig. 2: Heater hose and pipe routing-3.8L engine 0900c152800b8723.jpgFig. 3: Heater hose and pipe routing-5.7L engine
  1. Disconnect the heater hoses from the pipes.
  2. Remove the heater core by carefully pulling it towards you.
0900c152800b8724.jpgFig. 4: Exploded view of the heater core removed from the heater module assemblyTo install:
  1. Install the heater core and attach the heater hose assembly to the heater hose pipes. Note the following:
    1. Lubricate the heater core pipes with petroleum jelly for ease of installation and to assure a good seal.
    2. Be sure the seals around the heater pipes remain in place when installing.
    3. To verify that the seal is installed correctly, observe the seal from inside the engine compartment. If the seal has leaks, apply a sealer between the heater core pipes and the evaporator housing.
  2. Install the hose pipe clamp and the bolt/screw. Unclamp the heater hoses. Tighten the hose pipe clamp bolt/screw to 16 inch lbs. (1.8 Nm).
  3. Install the heater core clamp and screw. Tighten the screw to 16 inch lbs. (1.8 Nm).
  4. Install the heater module assembly cover and secure with the retaining screws. Tighten the screws to 18 inch lbs. (2 Nm).
  5. Connect the negative battery cable.
  6. Refill the cooling system. Operate the engine and check for leaks, add coolant if necessary.
  7. Install the instrument panel glove compartment.

Feb 03, 2009 | 1995 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...