Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: S60 HEADLAMP BULB CHANGE
I have had the same problem and have managed to Fix it!!
Just behind the headlamp is a black box that contains the engine management units. You have to remove some of this box......First unclip the two clips nearest to the engine and remove the top cover of the box. Then there are another two clips one by the wing and one by the engine that will release the lower section of the box. You will need a large flat screwdriver to open the final clip at the front of the box and, with some care, you can remove the lower part of this box. The engine management units ( the two silver boxes inside the balck box) will be left in place and should be disturbed as little as possible.
When this is done you can get access to the bulb. First remove the rubber cover from the rear of the light assembly. Then you need a flat mirror so that you can see inside the headlamp to see the connector, clip and bulb. Pull off the connector to the bulb - you must do this with the bulb still in place (you will not be able to remove it with the connector still fitted). Then you have to push the clip at the top to unlatch it and allow it to hinge down away from the back of the bulb. I bent an old screwdriver to 90 degrees and filed a small notch in it to help me push the clip and unlatch it. Note which way up the bulb comes out so that you can fit the new one the same way up. I know it will only go in one way but getting it correct first time saves messing about for ages! With the new bulb fitted, push up the clip and latch it in place again. Then fit the connector and test it before you refit the rubber cover and the black box. Remember to take care when removing and refitting the black box. It does come off - honest!
Posted on Mar 14, 2009
Posted on Oct 30, 2009
if u remove the under cover in the passenger foot well, just turn the fan blower on full and hit the first thing you see when u look under the pass foot well with the palm of your hand and the blower should start to work.
Posted on Apr 23, 2010
Tips for a great answer:
Sep 29, 2015 | 1999 Peugeot 406
Sep 22, 2015 | Peugeot Cars & Trucks
Jun 06, 2014 | 1999 Peugeot 406
Jan 22, 2013 | 2007 Peugeot 407 SW
Sep 09, 2012 | 2010 Peugeot 406 Coupe
Mar 09, 2012 | 1999 Peugeot 406
Sep 01, 2009 | 2005 Peugeot 405
Nov 23, 2017 | Cars & Trucks
60 people viewed this question
Usually answered in minutes!