Question about Saturn Cars & Trucks
Where to locate spark plug connection
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: spark plug replacement
Plugs are under the coil pack. The black rectangle on top of the valve cover. Remove the plug on the drivers side, and remove the 4, 10mm bolts. Lift up the coil straight up. Will be fairly tough, and your plug wells are in there.
Posted on Jan 24, 2009
turn the key to the run position,pop the hood and in the fuse block right near the battery youll see a fuse labeled oil -r push it down and hold it 10 seconds and then release and check to see if the light in the dash is flashing, if it is turn the kehy off and your done, if not do it again,sometimes does not work the first time,
Posted on Oct 04, 2009
There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.
Posted on Mar 30, 2010
They are under the black plastic cover that is in the middle of your valve cover gasket. Remove the intake hose from the aluminum intake plenum on top of the valve cover and the silencer box against the firewall. Remove all the connectors from the sensors which should be 2 on the plenum and the 2 large vacuum hoses on the plenum. Then remove the 3 12mm bolts from the plenum at the throttle body and remove the plenum. You can reuse the throttle body gasket at the plenum so don't destroy it. All the other bolts are 10mm and use a screwdriver to loosen the clamps on the hose. The sensors have clips that you need to remove with a small screwdriver, then disconnect them. Remove the bolts on the cover and the cover. Then remove the bolts holding the coil packs down. Do one plug at a time. 2 of them are connected to the 2 plug wires and 2 are underneath the 2 coil packs. The connectors on the coil packs are fragile so remove them carefully. Reverse the steps to reinstall the plenum, etc.
Posted on May 20, 2010
Tips for a great answer:
Feb 09, 2016 | 2002 Saturn L-Series
Dec 05, 2015 | 2000 Saturn L-Series
Oct 02, 2014 | 2000 Saturn LW
Aug 21, 2012 | 2000 Saturn L-Series
Jul 11, 2011 | 2002 Saturn L-Series
Jun 25, 2011 | Saturn SL1 Cars & Trucks
Jun 16, 2011 | 2000 Saturn L-Series
Feb 23, 2010 | 2000 Saturn LW
Dec 21, 2009 | 2000 Saturn L-Series
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: