Question about Hyundai Motor 1996 Elantra
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ticking valve hyundai lantra
They have solid lifters with different sized shims that sit in the lifter (referred to as shim and bucket design). Need to measures shim to lobe clearance and replace with different sized shim as necessary
Posted on Jul 02, 2008
SOURCE: valve clearances
Please use this link:
Posted on Aug 22, 2008
You can actually do it from the top if it is similar to a 2001 Elantra??? On your right center of the tranny, there should be two big bolts I believe a 17mm one on the bottom left the other top right of the other. The bottom left is the drain plug the top right is where you fill it. If you want to make things easier you can remove the air cleaner and the air cleaner housing then unscrew the sensor on top of the tranny you can poor it in from the top. You will need to then unscrew the fill hole (Top right bolt) Pour the lube in to the hole where you had taken out the sensor until it pours out of the fill hole. Sounds like more work but by doing this you will avoid making a mess trying to fit the squeeze bottle into the tiny hole. Hope this makes Sense????
Posted on May 17, 2009
SOURCE: Question re Hyudai Lantra 1997
If you have a look in your owners manual it says the engine warning light is linked to the exhaust system. i've talked to a couple of mechanics and they reckon its the oxy sensor. i tend to agree with this as nothing else unusual has happened with my car when this was happening and it was under fueling at the time.
it could also be a short as a couple of times when it happened, while on the move i killed the engine and re-started it and it didn't reappear. after using a bit of injector cleaner and a good service it hasn't happened since.
i wasn't able to get it plugged into a computer because it never stayed on after turning the ignition off.
Posted on Jul 08, 2009
try the left side of the engine... gear oils smell are diffent from the engine oil and the viscosity... gear oils are thicker... u wont go wrong on this...
Posted on Jul 19, 2009
Tips for a great answer:
Jun 13, 2017 | Hyundai Cars & Trucks
Mar 19, 2014 | 2007 Hyundai Sonata Limited Sedan
Jul 30, 2009 | 1990 Hyundai Excel
Jul 19, 2009 | Hyundai Motor 1994 Elantra
May 16, 2009 | 1997 Hyundai Elantra
Feb 23, 2009 | Hyundai Motor 1994 Elantra
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: