Question about 2001 Jeep Grand Cherokee

1 Answer

Change the crank sensor the cam sensor and the pcm and the 2001 jeep grand cherokee still is having an issue staying started and the gauges going crazy as well as the windows not working

My vehicle has had the crank sensor, cam sensor as well as the PCM all have been replaced. Still i am having issues with the vehicle staying started. The gauges seem to go crazy as well as the windows work occassionally. I dont know what else to do! Please help!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 17 Answers

I cant explain the windows but the stalling can be the wiring harness at the under the hood . you did not mention engine size but i know on in line 6 the harness goes around the rear of valve cover if you move it around it will stall if bad.

Posted on Jan 09, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2001 jeep grand cherokee no start, no cam signal or ASD control from pcm

IF YOU PULL OUT CAM SENSOR YOU HAVE TO PUT A TOOTH PICK IN THE TWO HOLES ON THE TOP AND THEN PUT IT BACK IN AND FACE IT TO THE BACK OF THE ENGINE.KING OF 4.0

Posted on May 15, 2009

  • 2309 Answers

SOURCE: I have a 1997 Jeep Grand Cherokee. Is there a way

pcms rarely go bad, i know it sounds bad but i would be checking for bad grounds

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 Jeep Grand Cherokee - Security Key Flashing/ Wont Crank after dead battery


A flashing key symbol normally means an invalid key. Do you have an other key to try? That all the gauges stay at 0 seems to point to a PCI data bus problem. Was the jeep parked outside or at least standing in the rain? Many times water ingress in connector C200 up in the passengers footwell area is the problem. The connector must be removed, cleaned/dried and reconnected. Ofcourse the source of the water ingress must be found, which many times comes from the windshield.

May 01, 2013 | 2001 Jeep Grand Cherokee

1 Answer

I have a grand cherokee 2000, at first it used to have the check gauges signal on, and never turn on the engine for a while, just after some hours the signal go and it is start, but now when the engine...


P0320 (M) No RPM Signal to PCM (Crankshaft
A CKP signal has not been detected at the PCM
Position Sensor Signal to JTEC)
Try changing your crank sensor. Hope this helps, James Booth

May 17, 2011 | 2000 Jeep Grand Cherokee

2 Answers

97 jeep grand cherokee is not getting spark at the ignition coil I think its the PCM


Have your crank sensor checked. It won't send a signal to fire the coil if the crank sensor is bad.

Jan 13, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Misfires after changing coils,sparks,pcm,crank and cam sensor. Last scan gives diagnostic codes P 0352, P1391


and the engine size is????? after spending all that money on parts, its time to have a qualified repair shop look at it. po352 involves #2 coil circuit.

Oct 21, 2009 | 2001 Jeep Grand Cherokee

2 Answers

1996 Jeep Grand Cherokee No Start


I would be thinking that there is a good chance that you need to be checking out replacing the computer, if you aren't getting any communication with the proper scan tool then the computer isn't communicating with anything in the vehicle...... I would have guessed first off that the ignition control module might be bad but that is obviously part of the computer also, I would be looking in that direction.

Sep 19, 2009 | 1996 Jeep Grand Cherokee

1 Answer

2001 jeep grand cherokee no start, no cam signal or ASD control from pcm


IF YOU PULL OUT CAM SENSOR YOU HAVE TO PUT A TOOTH PICK IN THE TWO HOLES ON THE TOP AND THEN PUT IT BACK IN AND FACE IT TO THE BACK OF THE ENGINE.KING OF 4.0

May 09, 2009 | 1999 Jeep Grand Cherokee

1 Answer

No spark at coil


check ignition pick-up coil and ignition module

Mar 31, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1999 Jeep Grand Cherokee Laredo won't run


if ur jeep has central lockin lock it and then unlock it ..........she might b sucking air inn

Feb 26, 2009 | 1999 Jeep Grand Cherokee

5 Answers

2001 jeep cherokee cranks, no start, no bus


I just had the same problem of my 2001 jeep cherokee not starting with no gauges responding and a "no bus" reading. After reading the responses I changed out the CPS and my jeep now runs great! however, it was not as hard as I thought it would be. Very easy with 7/16 bit and a 10inch extender. In and out in less than 5 minutes. Finding it was the hardest part. Blends in with the bell housing. I did this from under the jeep with a good shop light. I paid about $80 for the part here in Atlanta, GA

Jul 29, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...