- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
not knowing what vehicle you have is not easy to answer this question. most vehicles have a service warning on the instrument pack it uses distance and time to calculate when a service is due. most you can cancell using the instrument pack function buttons/switches some you need diagnostic equipment. just doing the relevant service will not put out the service warning you have tell the instrument pack that it has been done. if its a fault warning thats a differant thing and needs a obd code reader to help sort it out. hope this helps
Yedowitz, This a service light, may have nothing to do with horn, you will have to have it scanned to see which service is being required or the service code.
Four digit codes are brand specific. For a Range Rover product, code 1451 involves the canister purge or vent circuit. This is the system that the computer uses to vent gas tank fumes to the vapor canister. You will need to research this in depth for Range Rover models to get the test procedures. The warning light will stay on until the problem is fixed.
If the light is still on, but you don't think it's necessary you should see a mechanic or go to an auto parts store. They have readers that will tell you what is triggering it. That way you can figure out what you need to do to fix it. Sometimes it's something small but very simple. They should be able to help you. http://www.westendmechanical.com.au/vehicle-servicing
take vechicle back to service shop dont try fix yourself you have already payed for transmission service take vechicle back tell shop reverse light staying on let them fix it.
The service engine light does not affect the abs.You most likely have a broken wire in your abs system which is affected by suspension movement.A code reader which does abs codes will tell you which wheel circuit is turning on the abs light.When there is no abs available the track will turn off.
WELL IF SERVICE ENGINE LIGHT IS ON YOU HAVE A FAULT IN ONE OF THE SENSORS.YOU NEED TO SCAN CAR WITH CODE SCANNER SO YOU CAN FIX THE FAULTY SENSOR.THEN ERASE CODE.IF YOU DONT FIX THE PROBLEM THE SERVICE ENGINE LIGHT WILL STAY ON.
you need to have the trouble code read from the computer. i tune up might help but you may have more problems that a tune up will not fix. a bad sensor or a bad coil will show on a scanner.
you will need to take it in for a diagnosis scan. this Will scan for trouble codes that will direct you and your mechanic to the issue at hand. it will also tell you how to fix this issue as well. once this problem is fixed, the light will shut off.
In most cases, it a failed sensor of some sort. most auto zones will scan the ecm for free.
×