Question about GMC Yukon Denali

1 Answer

Whe the ball joints on 07 denali have to be replaced

I'm About to make a long trip to Texas, and I want to be sure that I'll not have any problems in my way.

Posted by on

Ad

1 Answer

What is the question?

Have a shop replace them if they
have failed

Posted on Jan 09, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 51 Answers

SOURCE: replace ball joints

Remove in this order: wheel, loosen the 4 lower ball joint set bolts, cotter pin and nut from tie rod, tie rod from ball joint bracket, ball joint from lower control arm, 4 lower ball joint set bolts, ball joint from suspension. Install is reverse but don't tighten the 4 lower ball joint set bolts.

torque is as follows:
ball joint to control arm- 112 ft-lbs
Tie rod nut- 67 ft-lbs
lower ball joint set bolts- 83 ft-lbs
remember to use a new cotter pin

Posted on Oct 08, 2008

michigan man
  • 3533 Answers

SOURCE: Replacing upper ball joint (2001 Silverado 1500)

try autozone for a diagram and assistance and you can also rent the tools needed for the job

Posted on Jan 18, 2009

shawnsz
  • 64 Answers

SOURCE: lower ball joint replacement 2003 GMC Sierra 2WD

You have to drill them out, it can be a real pain to.

Posted on Feb 19, 2009

chrisK1997
  • 103 Answers

SOURCE: 2000 lincoln ls bad ball joints! should i replace whole knuckle or just ball joints

yes you can buy just the ball joints

Posted on Apr 18, 2009

  • 218 Answers

SOURCE: Replacing ball joints on 1999 Ford Expedition

U CAN REPLACE JUST THE BALL JOINT OR THEY COME WITH THE ARMS.DEPENDING ON MECHANICAL ABILITY AND TOOLS IT IS MUCH SIMPLER TO REPLACE THE ARMS

Posted on May 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy joint ball knuckle


original can be riveted ,,, have to drill out and replacement should have bolts

Dec 01, 2013 | 2005 GMC Yukon Xl Denali

1 Answer

Upper ball joint on 2005 lincoln navigator 4wd has play in it


Correct. Replace them all at the same time as you will need to track steering after replacing ball joints. Check rubber anti roll bushings when your at it,

Apr 05, 2013 | 2005 Lincoln Navigator

1 Answer

Ball joint replacement - seating the new ball joint, control arm too tight against the turning knuckel


May have to remove the Wheel Hub Brg Assy, to get clearance
for ball joint press tools

Have to have the axle out of hub also

Jul 18, 2012 | 1991 Oldsmobile Cutlass Ciera

1 Answer

I have a1966 chevy impala,should I replace upper and lower ball joints at same time joints


I would if for no other reason insurance. you'll know for your self what you have and your already there with it all taken apart it's just cheap insurance in my book

Jul 15, 2012 | Cars & Trucks

1 Answer

Clunking?


Retest the fitting and inspect the ball joints again to confirm its not the issue.For that click the help links shown below :----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing on car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
--------This will help.Thanks.

Jan 23, 2012 | 2000 GMC Yukon Denali

1 Answer

2004 kia optima upper ball joint


You have two options. 1. You can replace the upper control arms which come with the ball joints. Replacing is simple. Remove the nut that holds the ball joint to the knuckle. Seperate the ball joint from the knuckle. Remove the two nuts that hold the control arm to the body. 2. Buy or rent a ball joint press. Remove the control arm as described above. Press out the old ball joint. Press in the new ball joint. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 15, 2012 | 2004 Kia Optima

1 Answer

How to replace ball joints


the lower ball joint is pressed into the lower control arm. You will need a ball joint press to remove and install the ball joint. The other option is to replace the lower control arm.

Some parts store will have presses for loan. You will have to check around and see if any in your area have these. If you can't find one you could always pull the control arm and bring it to a shop or machine shop and have them swap the ball joint.

Its a pretty simple procedure.

1. remove the wheel
2. remove the pinch bolt that secures the knuckle to the ball joint.
3. separate the lower control arm from the knuckle.
4. remove snap ring from the ball joint (if it has one)
5. use a ball joint press to press out the old ball joint.
6. press in the new ball joint.

if you don't have a press than you can remove the lower control arm by following steps 1-3 above. then remove the bolt from the front bushing. Remove the stamped steel skid pan from the sub frame. Remove the rear lower control arm bushing mounting bolts.

If you have any questions I'll be happy to answer them.

Oct 13, 2011 | 1998 Dodge Caravan

2 Answers

Replace lower ball joint


I use and I'd recommend you register for free at www.autozone.com Once registered you'll have access to repair and shop manuals for virtually any car or truck. All the data and diagrams you need now or may need in the future will be a couple of mouse clicks away.

Jun 28, 2011 | 1999 Ford Taurus

1 Answer

I need to replace the ball joints both upper & lower on both sides, I have a ball joint removal & press. I got both uppers with no problems but can't get the lower ones to budge at all, I tried...


Turn the spindle Knuckle to one side so you can hit it with a big hammer and smack the fat part of it while putting pressure on it. If this doesn't work heat and repeat. I can give you more Ideas but I don't know what your car is.

Jun 18, 2011 | GMC Yukon XL Cars & Trucks

2 Answers

Need to know how to remove front halfshaft on a 1998 chevy blazer


Google the exact steps...you'll be amazed what you find.

Apr 19, 2011 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...