Question about 1997 Eagle Vision
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i have a 1990 turbocharged
Does it sound like it even tries to start? like sputter or anything?
Check for fuel getting to the pistons. Maybe loose or faulty electrical connection to the fuel injectors.
Posted on Sep 23, 2008
The piston doesn't screw in, that is usually for vehicles with rear disc brakes that incorporate the park brake in the caliper. The correct way for yours is to open the bleed screw and compress the piston. The most common (shade tree) way is to simply use a screwdriver and pry against the rotor pushing the piston back. Some pistons are ceramic so be careful not to crack it. If you pry between the old pad and rotor you should be ok.
Posted on Apr 21, 2009
It may be a dirty air cleaner or a dirty Idle Airflow Valve . The IAC can be cleaned by taking off the duct work that goes from the air assembly to the fuel injector hole. The valve is to one of the sides of the hole just inside. You will see two small holes. Buy some card cleaner and with your engine running at about 1300 rpm spray the cleaner directly into these holes. Spray for a good 10 seconds. Stop the engine and let the cleaner soak in. Repeat this about 4 times. If it still idles rough it may be the Idle position sensor or you have to replace the IAC.
Posted on Nov 20, 2009
Tips for a great answer:
Apr 20, 2015 | Eagle Cars & Trucks
Sep 20, 2014 | 1995 Eagle Vision
Jan 09, 2013 | 1997 Eagle Vision
Sep 23, 2012 | 1995 Eagle Vision
May 01, 2010 | 1994 Eagle Vision
Oct 26, 2009 | 1997 Eagle Vision
Jan 29, 2009 | 1995 Eagle Vision
Aug 17, 2008 | 1997 Eagle Vision
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: