Question about Cars & Trucks

Open Question

Who fix code p2101 mitsubushi lancer 2007 - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the transmission range sensor for mitsubushi lancer model 1997 located

On the transmission case. Below is a typical Mitsubishi Range selector switch. We do not have "Lancer" in the USA"

Feb 06, 2018 | Mitsubishi Lancer Cars & Trucks

1 Answer

Code p2101

The reason for the P2101 OBD-II Engine Trouble Code is P2101 Throttle Actuator A Control Motor Circuit Range/Performance.

Jan 23, 2016 | Cars & Trucks

2 Answers

Battery dead, jumped, check engine light, code p2101

The reason of a P2101 code is the Throttle ActuatorP2101 Throttle Actuator A Control Motor Circuit is Range/Performance, so you have to check ODB-II Engine trouble code list.

Jan 23, 2016 | Cars & Trucks

1 Answer

How do i fix?

P0122 throttle/pedal position sensor/switch A circuit low input
P0223 throttle/pedal position sensor/switch B circuit high input
P2101 throttle actuator ctrl motor circuit rang/perf
P2104 throttle actuator ctrl sys-forced idle
P2110 throttle actuator ctrl sys-forced limited rpm

Here is the meaning of the codes hope this helps

Sep 20, 2015 | Cars & Trucks

1 Answer

Where is the ETACs ecu in 2009 lancer

Mitsubishi Lancer 2007 2010 Service Repair Manual


Jul 31, 2015 | Cars & Trucks

1 Answer

Engine won't throttle up codes p0123,p2101,p0222&c121c

P2101 - Throttle Actuator 'A' Control Motor Circuit Range/Performance

Read more:
P0222 - Throttle/Petal Position Sensor/Switch 'B' Circuit Low Input

Read more:
c121cThis has to be checked by someone with a computer capable of communicating with all the systems/computers in the vehicle to determine what is wrong here. you have a problem with you electronic throttle control .
P0123 throttle position sensor . You need a new throttle body or have a wiring harness problem !

Electronic Throttle Control ETC System Electronic Throttle Control ETC System

Mar 04, 2015 | 2008 Dodge Grand Caravan

2 Answers

I recently installed new speakers in my 2010 mitsubishi lancer and when I put the door panel back on I can no longer open the door from the inside. Also the lock only halfway closes. I can't remember...

Most mitsubushi door handels have a loop and hook type connection,
You most likley un hooked the lever.
You need to remove the door handel with the panel attached to the door and re-hook the lever.
good luck,Gary

Oct 19, 2011 | 2003 Mitsubishi Lancer

1 Answer

Serpentine belt routing guide for 2003 Mitsubushi Lancer

Hope this helps. one for Evolution and the other is not.


Aug 18, 2010 | Mitsubishi Lancer Cars & Trucks

1 Answer

P2101 TAC motor circuit error

Error code p2101 involves the electronic throttle control. Which essential controls your throttle, the car won't accelerate if the code went away and came back after you changed the battery chances are it's just the throttle control sensor which isn't that expensive to replace.

Sep 02, 2017 | 2006 Nissan Altima

1 Answer

Wont start

The sensor ($100) in the throttle body ($400) is dirty and your engine is running high mix of gas. If you do not get it fixed, it will melt your catalytic converter ($1000) and stop up your muffler and your car will not run until you clean out the muffler system. If your car is not running, test this by disconnecting the exhaust manifold and try to start it.

Dec 25, 2008 | 2007 Suzuki Reno Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13723 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides