Question about 1998 Oldsmobile Intrigue
How do you remove left rear door panel from a 2007 jeep patriot?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most GMs are pretty much the same. Remove the inset around the door handle - there may be one screw and then it should slide out.
The panel itself is held in with plastic retainers - probably 3-4 along the bottom edge and then 1-2 on the sides. These need to be pryed loose. If you can't get them with your fingers, use some other non-sharp object to help.
Once the panel is loose, keep it close to the door and slide it up - releasing the edge right next to the window glass. You may have to work it back and forth a bit.
When you put it back, getting the edge by the window on right is key to holding the panel on correctly. Many people don't get this seated right and the panels always are loose.
Posted on Oct 12, 2009
SOURCE: remove right rear door panel
IMPORTANT: Discard the old door trim panel retainers and replace with new retainers before installing the trim panel
Posted on Nov 04, 2008
The inner door panel is held in by clips and screw.
Look at the door near the door handle there should be screws holding it in and along the outer edge of the door. Once loose, and the door handle removed or the arm rest removed. The door panel then prys out , because of the clips that hold it on. Then pops out by applying pressure to the panel upward to the top of the door. The clips always break because of the design and plastic.
Posted on Mar 21, 2009
SOURCE: rear door panel removal
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Jan 14, 2016 | 2011 Jeep Patriot 2.4
Jan 07, 2016 | 2007 Jeep Patriot Limited
Mar 14, 2015 | 2014 Jeep Patriot
Feb 06, 2012 | 2007 Jeep Patriot Sport
May 09, 2011 | 2007 Jeep Patriot Sport
Jan 28, 2011 | 2007 Jeep Patriot Sport
Jul 07, 2009 | 2007 Jeep Patriot Sport
959 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: