Question about Mitsubishi Cars & Trucks

1 Answer

Truck has no power to start new battery and starter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.



From start to end troubleshooting these problems I suggest you to check the help link below and follow its procedure: -----


Mostly all types of car no start problems are discussed here with solutions:---

CAR NO START: ENGINE NOT TURNING OVER:

http://alltypesofpartsreplacing.blogspot.com/2012/11/car-no-start-engine-not-turning-over.html

---------

These will help.

Thanks.

Posted on Jan 08, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: truck won't start

you should check the fender mounted Starter solenoid, and what type of power is going to your starter? constant Battery Power Or Start Power if you have both then you should check your Engine to Chassis ground Strap for a loose connection. Good luck!

Posted on Jun 20, 2008

  • 45 Answers

SOURCE: started truck and sounded week truck shut off

MAYBE BAD SOLENOID ON STARTER? HAVE YOUR ALTERNATOR CHECKED OUT FIRST

Posted on Jun 08, 2009

yankstorm02
  • 145 Answers

SOURCE: lost all power to my truck. have new battery.

You can access free repair manuals online @ google ebooks and autozone.com

Posted on Oct 02, 2009

  • 4088 Answers

SOURCE: my 2000 gmc truck will not start. New starter,

I assume that you mean that the starter will not run. Do you hear the starter solenoid operate (click) when attempting to start? If so, using either a voltmeter or test light, look for 12 volt power at the battery side of the solenoid. If none or it disappears when the starter attempt is made, check the cables from the battery for badly corroded ends. Also, check the grounding cable running from the frame/body over to the engine block for damage. If you hear no click from the solenoid, look for power which should appear at the small terminal of the solenoid when starting. If you get power, replace the solenoid. If no power, then look for a blown fuse, bad relay, bad ignition switch, or any damaged wiring. Make sure the new battery is fully charged. Hope some of this helps!

Posted on Dec 14, 2009

  • 514 Answers

SOURCE: WHEN I TRY TO START

i dont know the year model etc. but most of the starter are lacate it underneath your car on transmission side, hold by 2 or 3 bolts and two electrical conections hope this will help ya

Posted on Sep 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring diagram for a 2002 chevy s10 4 wheel drive 4.3 for the starter to the switch


If the truck cranks over you have voltage at the ignition switch ! From starter to switch , First off starter to what switch ,ignition ? There is a 175amp fuse that supply's battery voltage to the power distribution center - fuse box under the hood . On the lower right side of the radiator support, below the battery !

Sep 10, 2015 | Cars & Trucks

1 Answer

Tested new starter and it works offline, but when I install starter on my 77 Ford f150, the truck doesn't turn over, why?


Was there any symptoms prior to the vehicle not starting? Could engine have seized? Is it auto or manual? If manual can you put into gear and push the vehicle to see if the engine moves freely?

Jan 17, 2015 | Ford Cars & Trucks

1 Answer

Starter won't engage heat gauge goes across to hot when trying to start truck. What causes this?


Voltage drop? I'm guessing you don't have a voltmeter, so turn on the headlights and observe them as someone tries to start the truck. If the lights go out, bad connection at battery, starter, or ground. If the lights get dim, probably the starter-it's drawing power, just not working. If the lights don't change, check for power going to the starter solenoid on the small wire on the starter; voltmeter or test light, check if the small wire to the solenoid has power when key is held in start position-in crank position. There should be battery voltage there when the key is turned to crank. If so, the starter or solenoid is bad. If no power there to solenoid, power is lost somewhere between ignition switch and the starter wire.

Mar 05, 2013 | 1994 Chevrolet C1500

1 Answer

Problems with power to starter


what is the make and model and year please? you are saying the starter was jumped to start your truck. I am hoping you do not have a new truck.

Feb 11, 2013 | Cars & Trucks

1 Answer

Truck wont start


replace battery cables could have bad ground cable.if see dash lights on when turn ignition to on position.check starter fuse or relay or remove starter check for faulty starter solenoid or starter.if starter okay and fuse starter relay okay ignition fuse and switch okay see dash lights could have problem in the theft security system need have vechicle code scan see if theft security fault code show up.

Jan 28, 2013 | 1998 Chevrolet Chevrolet silverado

2 Answers

When I get in the truck I have ZERO power. I turn the key and nothing, then I slam the driver door and eventually the truck will start. I am a single father and I dont have the cash to take it to a shop. ...


First check both battery terminal connections...check for corrosion and clean...also check for tight connections...dirty or loose connections can cause this symptom...:) Nice truck! Last resort would be to check the cable connection at the starter...corrosion...tightness...:)

Dec 13, 2010 | 2007 Chevrolet Colorado (Extended Cab) New...

1 Answer

My 2000 gmc truck will not start. New starter,


I assume that you mean that the starter will not run. Do you hear the starter solenoid operate (click) when attempting to start? If so, using either a voltmeter or test light, look for 12 volt power at the battery side of the solenoid. If none or it disappears when the starter attempt is made, check the cables from the battery for badly corroded ends. Also, check the grounding cable running from the frame/body over to the engine block for damage. If you hear no click from the solenoid, look for power which should appear at the small terminal of the solenoid when starting. If you get power, replace the solenoid. If no power, then look for a blown fuse, bad relay, bad ignition switch, or any damaged wiring. Make sure the new battery is fully charged. Hope some of this helps!

Dec 14, 2009 | 2000 GMC Sierra

1 Answer

Brand new battery installed, still no power?


YOU COULD HAVE A VERY BAD CONTECTION FROM BATTERY TO STARTER, TRY TO ATTACH LEAD DIRECT TO STARTER (LARGE FEED CONTECTOR) FROM JUMP BATTERY AND THEN CRANK WITH FULL BATTERY, IF SAME STARTER IS JAMMED OR SIEZING UP

Feb 02, 2009 | 1985 Chevrolet S-10 Blazer

1 Answer

Truck won't start. New starter about month a go. Truck will push start easily and stay running. Charging system is working (battery stays around 12.65 and 13 running or off) Power is going to starter. Any...


you should check the fender mounted Starter solenoid, and what type of power is going to your starter? constant Battery Power Or Start Power if you have both then you should check your Engine to Chassis ground Strap for a loose connection. Good luck!

Jun 20, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...