Question about Cars & Trucks

Open Question

Sew pro zz-401 timming belt

I need a new timming belt, where can I order one?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7353 Answers

SOURCE: FIRING ORDER DOES NOT MATCH MARKING ON TIMMING BELT

replacing the timing belt does not change the firing order. the dist should only go in one way. the firing order is, 1 3 4 2

Posted on Sep 23, 2009

Testimonial: "thank you very much sanjuana"

  • 70 Answers

SOURCE: need diagram for timming mark set up to install belt

Here ya go, 84775161

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda 2001 crv bad timming belt didnt break but lost few teeth skip timming is it worth saving please help!


Well it is an interference engine which means if the belt breaks the pistons could damage the valves.
If it only jumped a couple of teeth it may not have damaged anything.
I would put a new belt on and check compression.

Sep 07, 2012 | Cars & Trucks

1 Answer

Replaceing timming belts A, and B,


If I understand you correctly it seems like belt "b" came off. If in deed it came off it is possible that it did som damage to the crank sensor and now since the computer doest have an rpm reference the vehicle won't start. You may have to revisit the work done and make sure everything is in order. Keep in mind this is an interference engine. Meaning that misalignment of the cam and crank or a belt coming off or breaking while everything is in motion will cause internal damage to the engine. Good luck.

Sep 03, 2012 | 2004 Kia Optima

1 Answer

What would cause difficulty in putting on a serpentine belt? The car squeeks when the belt was on before, now it is difficult to put on the belt in order to see what causes the problem.


Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this will release the tension on the belt, or in the case of installing a new serpentine belt, allow you to get it where it belongs. Hope this helped Tim

May 28, 2011 | 1996 Chrysler Town & Country

1 Answer

Have a 98 soob outback, leaking oil


it should be changed with the timming belt both cam and crank seal its easy all you have to do is screew in a small screw and pull and to put a new one in just place it in get a socket of the same size and tap it in you also need to remove the timming belt un less you know what your doing bring to a pro..

Jul 13, 2009 | 1997 Subaru Outback

1 Answer

Timing belt not turning


a stripped group of cogs on timming belt is most likely ur problem,a new timming belt may not solve ur problem,this is a interference engine ,u may have bent vavles,install timming belt and if it runs,and runs smooth and got plenty of power,then u will be ok

Jun 28, 2009 | 2000 Kia Sephia

1 Answer

Removing timming belt to change thermostat


The front bumper cover radiator condenser will have to come off . To keep from bending valves have a mechanic fix this. In the long run you will save time and money.

Jun 17, 2009 | 2001 Volkswagen Passat

1 Answer

Need to replace the timing belt


the timing belt you need will have round teeth and is not hard to replace if you have good tools/recomend u replace the tensioner,idler also/the timming marks come on the new oem belt ,

Aug 26, 2008 | 1993 Volvo 940

1 Answer

Outting timming belt


altimas have timing chains no belt replacement needed (both have chains 2.5 and 3.5 engines)

Aug 04, 2008 | 2004 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...