Question about Ford F-150

1 Answer

4way flashers work but turn signals do not fuse is good

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Have you checked the relays?

Posted on Feb 09, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MNfisherman
  • 11896 Answers

SOURCE: pontiac firebird 2001, my turn signals don't work.

the problem most likely exist in the signal lever. Check and trace your wiring from lever to flasher

Posted on Apr 03, 2009

sawdust46694
  • 398 Answers

SOURCE: no turn signal indicators

there are 2 they are the same switch them and take the bad one yo auto zone or wal art and pick 2 up put one back in the 4 way flasher. one in tool box or glove box and your set
good day to you
saw

Posted on Jul 05, 2009

  • 1986 Answers

SOURCE: Brake/turn signals/flashers not working, fuses ok, what now?

There should also be a unit called the electronic flash module / unit. It should be somewhere under the driver's side dash.. unfortunately I do not know where in particular

Posted on Aug 13, 2009

  • 80 Answers

SOURCE: turn signal will not work

there are 2 flashers for that system, one works the turn signals, the other work s the 4 ways.

Posted on Jul 27, 2010

  • 594 Answers

SOURCE: Turn signal/flasher just quit working. They were

IS THE FLASHER STILL IN THE FUSE BOX OR PARTIALLY UNPLUGED

Posted on Apr 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Signal light flasher 2001 2500hdsilverodo


turn on your 4way flashers ,and go under dash and feel fore the clicking next to the fuse box they are on a separate system but the flashers are all located in the same place also look in the owners manual

Jul 30, 2015 | Cars & Trucks

2 Answers

Have a 1988 Jeep Wagoneer with a few issues. My turn signals no longer blink or flash that I know of..?


Okay, the first thing to check is to turn on the signal on one side and see if the outside signal light comes on. if the light comes on then try replacing the flasher. Also see if your 4way flashers work or if they are also out. if they are out then check your fuse first.
If the fuses are good then try the flasher, if the flasher does not solve the problem then you may need to replace the turn signal switch. I have worked on a few of these and most of the time it was a flasher or the turn signal switch. good day.

Mar 02, 2012 | 1988 Jeep Cherokee

1 Answer

Turn signal will not work


there are 2 flashers for that system, one works the turn signals, the other work s the 4 ways.

Jul 27, 2010 | 1996 Dodge Caravan

1 Answer

Have a 1988 chevy truck; blinkers don't work. fuses are good, bulbs good. don't have power coming from fuse panel. flasher relay has been replaced


did u change the correct flasher?there are 2 flashers,the regular turn signal one and the 4way flashers,make sure u changed the right one,,,

Jul 07, 2010 | 1988 Chevrolet C1500

2 Answers

Brake lights and turn signals quit working


The first thing to do is check the fuses, the fuse may have blown, maybe to a short or bad bulb, start with the fuses and also make sure the 4way hazard lights switch is off.

Jun 26, 2010 | 1995 Mercury Grand Marquis

1 Answer

Turning Signals not working


if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Apr 28, 2010 | 1989 Buick LeSabre

2 Answers

I have turnsignals problem on 92 buick lasabre limited i replaced flasher, all bulbs are good. if i manually move the turnsignal lever up and down the bulbs will flash also hazard lights work what else can...


When you say you replaced "flasher" I'm guessing you mean the combination turn signal flasher unit. If the hazards "flash" on the 4 way but the turn signal does not you are looking at a turn signal switch type problem. ... If 4way flashers do NOT work you need to check wiring immediately around the flasher unit mounting area.Or change Flasher unit Good Luck.

Apr 11, 2010 | 2000 Buick LeSabre

1 Answer

No turn signal indicators


there are 2 they are the same switch them and take the bad one yo auto zone or wal art and pick 2 up put one back in the 4 way flasher. one in tool box or glove box and your set
good day to you
saw

Jul 05, 2009 | 2000 Renault 181

1 Answer

Turn signals don't work


Yes...Whatever you want to call them, there are two flasher units. Depending upon year, the 4way is usually on the fuse panel, the turn flasher may also be there, or up under dash on driver side, or, on newer vehicles there is a combination flasher module usually located on the right side under dash near the steering column.

May 05, 2009 | Jeep CJ5 Cars & Trucks

1 Answer

Pontiac firebird 2001, my turn signals don't work.


the problem most likely exist in the signal lever. Check and trace your wiring from lever to flasher

Apr 03, 2009 | 2001 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...