Question about Ford Ranger

1 Answer

Tail lamps and dashboard illumination not working. what fuse is that?

Tail lamps and dashboard illumination are not listed in the fuse diagram from the owner's manual. Can anyone tell me which fuse it is?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 373 Answers

It should say lts. or pan. lts If not , you should go through each fuse looking at them to see if they are blown. You didnt say what make model or year you car is, but it could also be a ground. Let me know make model and year

Posted on Jan 08, 2013

  • Timothy Bowers Jan 08, 2013

    1999 Ford Ranger

  • jamiem1416
    jamiem1416 Jan 08, 2013

    My old ranger did the same . Look under the back end by the tail lights under neath. Chances are that it's a ground wire hanging. They are known for this. But check fuses first. If you take out your tail lights and follow the wires there should be one on each side that is grounded to the chassis. These come loose all the time on rangers. Check fuses, than ground wires and let me know how you make out

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
reichweinj
  • 71 Answers

SOURCE: 2006 Chevy Trailblazer Tail Lights

There was a recall on this, take to the dealer and they will replace the whole socket on this.

Posted on Nov 10, 2008

  • 3 Answers

SOURCE: 03 Suzuki Alto - Dashboard, tail lights not working

I have this car it has huge electrical problems. Something in the computer/alternator/etc. I have no speedometer, all my internal lights are screwed up. I've had 2 alternators, a starter and 4 batteries in 2 years. Get rid of it.

Posted on Dec 05, 2009

SOURCE: WHERE IS HONDA CRV TAIL LAMP FUSE

hi,
i have provided the picture showing the location of tail lamp fuse for Honda. I have marked it too for your reference. Please rate my solution as helpful.Have a nice day!7c6a615.jpg

Posted on Mar 05, 2010

  • 1 Answer

SOURCE: Tail light, backup light and dashboard light will not light up??

96 eclipse rs back tail lites and dash wont come on i changed the combination switch ,fuses,relays and bulbs and it still dont work what else can it be?

Posted on Apr 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 03 Chevy tracker and tail light , dash light won't come on. I checked fuses. Is there any thing else I can check ?


Turn the parking lamps or headlamps on in order to illuminate the instrument panel and instrument panel cluster lamps. Voltage applies at all times through the TAIL fuse to the tail relay. Turning the turn signal/headlamp switch to the PARK or the HEAD position provides a ground path to the coil side of the relay to G202. The ground path energizes the coil of the relay. This closes the contacts in the relay. The closed contacts apply voltage to the IP dimmer illumination controller and all the illumination lamps. The illumination lamps are ground through the illumination controller. The controller is located on the left side of the instrument panel. Since the illumination controller is ground to G200, the lamps illuminate when voltage applies. The intensity of the instrument panel and the instrument panel cluster lamps is adjusted by the controller (4). The controller controls the intensity of the lamps by controlling the amount of current from the lamps to ground.Check the tail relay !

Apr 24, 2017 | Cars & Trucks

2 Answers

How do I change the fuse for tail lights?


Some tail lights the fuse is located under the lamp of the lamp holder, hope that helps?

Mar 04, 2015 | 2000 Subaru Legacy

1 Answer

2000 Lexus LS400 Instrument panel fuse


It's more likely a fuse is blown, the tail lights are on the same fuse as the dash illumination, check the tail lights if they are not working replace the fuse marked 'tail' in the fuse panel on the inside at the left side of the dash under the cover. At the same time check the 'gauge' fuse', there is a fuse location diagram on the cover.

Apr 13, 2014 | 2000 Lexus LS 400

1 Answer

Dash lights do not work


Power is supplied to the instrument illumination by the "TAIL/ILLUM LIGHT" fuse, Fuse #4 (15 Amp) located in the dash fuse block under the left side of the dash. This fuse provides power for both the primary and secondary sides of the TAIL LIGHT relay. The Combination (Headlamp) switch provides a ground path for the primary circuit of the TAIL LIGHT relay. When the primary circuit is completed by the Combination switch, the secondary contacts close and provide power to the tail lamps as well as to all of the instrument illumination bulbs. The ground for the instrument illumination bulbs is a variable-resistance circuit which is controlled by the illumination controller. The final ground for both the combination switch and the illumination controller is Ground G302, located under the center console.

Dec 23, 2011 | 2001 Isuzu Rodeo

1 Answer

Which fuse controls the tail lights on 2002 ford excursion


Although the Mitcell fuse legend does not list it as such, their wiring diagram shows the park lamp relay (which should power up the tail lamps) to be powered by fuse number 38 in the central junction box. 20 amp

Oct 31, 2011 | 2002 Ford Excursion

1 Answer

Tail lights wont work?


This sounds obvious, but first things first. Replace the bulbs, and check the tail lamp fuse. Usually if the tail lamp fuse is blown, your dash illumination will also not work. They put them on the same fuse because you really never see your tail lamps while you are driving, and if your dash lights are out, it will alert you to a problem.

Aug 14, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

No dashboard illumination even round heater controls checked fuse and fuse ok


Check to see if your tail lights are working. most time when your dash lights go out it is to indicate your tail lamp fuse is blown.

Mar 09, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2001 jaguar s type - Right tail lamp failure message.... I replaced bulbs and fuse and tail lights still don't work but the dual element right break light does illuminate when I press the break also right...


There is a harness that you unplugged for the rear tail lamp. Make sure it is fully pressed and locked. This is always the cause on jags for tail lamp failure.

Dec 14, 2010 | 2001 Jaguar S-Type

1 Answer

Non-working tail lights


Tail light bulbs used are double element one is tail one is turn check your bulbs and, make sure the lamps for your turnsignal have two pins and, are a different number than your other lamps

Apr 11, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...