Question about 1993 Jeep Grand Cherokee
Hi beams work fine.
If you know the low beam bulbs are good, I would check for power in and out of the dimmer switch first. The dimmer switch directs power to each circuit.
Posted on Jan 08, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.
Posted on Jul 15, 2009
SOURCE: 96Grand Cherokee ,headlights
Why did you replace the switch without checking the headlight bulbs first? Suggest you check the headlight bulbs, if they are good, then check the connectors, if they are good, then check the fuse box. Sometimes there is a fuse for the healights right and left. If all of that is good check your ground connections. If all of that is good, then is to basics........check continuity on the harness, ensure there is current through the connector to the lights contact.
If all of athe above is good, then I always advise to check the fuse links. You might have burned one out. They are usually located near the battery.
Posted on Nov 05, 2008
Tips for a great answer:
Aug 25, 2014 | Cars & Trucks
Mar 31, 2014 | 2009 Chevrolet Malibu
Jun 04, 2010 | 1993 Nissan NX
Sep 07, 2009 | 1998 Ford Windstar
Aug 12, 2009 | 2005 Mazda 3
Nov 12, 2008 | 2001 Chevrolet Blazer
Dec 21, 2014 | 1993 Jeep Grand Cherokee
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: