Question about 2010 Suzuki Grand Vitara

2 Answers

In the existing tail and brake light wire harness, where do i connect a trailer wire harness? are the connections in the light assemblies or hidden somewhere else?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

In the rear of the Zook, there is an oblong plastic insert panel. It pops out rather easily. Inside is your rear light wiring harness. On this harness is a plug, which is just hanging there, and attached to nothing. Buy a dedicated trailer light harness.I bought mine at NAPA: it cost a bit more than the others, but it has the other plug needed to plug into the car wiring harness. This is what I mean about a dedicated (specific) wiring harness especially designed for a Suzuki Vitara; no wires to splice or solder, everything clean and neat and easy to do. Plug the trailer harness into the car harness, and then just hide the R and L wires underneath your plastic trim. You can either have your trailer plug hard wired through a drilled hole in the body, or just leave it stuffed in the back, and have it hang out the rear door when towing.

Posted on Feb 05, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Try on the bottom of the back of car

Posted on Jan 08, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 138 Answers

SOURCE: suzuki sidekick trailer wiring, 1994

Usually the easiest place is inside the passengers side quarter panel just in front of the taillight.

Posted on Jul 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Fairmont just put tow bar on where do u wire a trailer plug into


go to a muffler / tow bar fitting shop and see if there is a trailer harness available
if there is it is a simple piggy back plug on a tail light assembly
If not you will have to identify each wire and there is a piggy back connector that allows you t place a trailer wire in it and it closes over the existing wire and you use pliers to press the section together to clip it
AS you do this a small metal clip connects the existing wire to the wire you placed in the clip Get several color wires for this so that you can easily identify which wire connects to which light

May 22, 2016 | Cars & Trucks

2 Answers

Lost all elec.power to trailer plug on jeep


The trailer connection is usually fed off the wiring from the brake and tail lights If those work, my guess is the wire that goes to ground is open. try following the harness back toward the tail and brake lights looking for broken or corroded connections. If you have a meter or 12v test light try connecting the one end to a good ground if using a meter it should be the black or negative lead. Turn on the running lights and one turn signal while probing the plug if you get voltage or the light to light you have an open ground. Locate and repair the connection.

Aug 07, 2014 | 2010 Jeep Liberty

2 Answers

Trailer light hook-up


If this DeVille is trailer-ready, there is a trailer harness fuse box with 10A fuses for tail lights (PPL wire), left turn/stop/tail lights (YEL wire), and right turn/stop/tail lights (DK GRN wire

Oct 16, 2012 | 2001 Cadillac DeVille

1 Answer

Hi got brake light but no tail light fuse all good can any one help me please


Check the rear harness wiring harness for corrosion or a broken wire. Should be the brown wire that power up tail lights. Also if you have trailer wiring disconnect it and see if it goes away. Trailer wiring very often cause high resistence due to how they are connected.

Jan 27, 2011 | 1983 Ford F150

1 Answer

How to connect a 4 wire trailer system to a 1994


Tail lights and brake lights are on the same wire.
Connect the wire from the brake light to the connector in the car to the tail lamp wire connector and you will be set to roll

Apr 04, 2010 | 1991 Toyota Pickup

1 Answer

05 Chevy Colorado trailer harness right turn not working


you must check the connection where the truck harness meets the added trailer harness on the truck itself not the trailer harness.

Apr 04, 2010 | 2005 Chevrolet Colorado

3 Answers

Trailer lights have two wire out of each fixture left turn goes on left side Right hand turn goes on the other side Tail lights connect how and brakes connect how?


One wire is for the brake/directional filament and the other wire is for the tail light. The fixture should be grounded when it is attached to the bracket. To test which is which (the brown wire is USUALLY the ail light) make sure the fixture is grounded and touch a hot wire to each of the wires coming from the fixture. Watch to see which wire lights up the brighter filament and this is the brake/directional light. The dimmer filament if the tail light. Brakes lights and directional lights are both the same filament. Wen the brakes are applied, both lights are activated. When a direction light is turned on, it simply flashes the brake light filament.

Apr 04, 2010 | 2007 GMC Sierra 3500HD

1 Answer

What number is the fuse on the trailer brakes


i believe the trailer brakes run off the same fuse as the tail lights no extra fuse all the ones ive seen the trailer lights just fuse into the wiring harness of the rear tail lights so if your brake and turn signals works your prob is gonna be in the trailer lights them self or your connection in the wiring right behind the rear bumper. Hope this helps

Sep 22, 2009 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Pressing brake causing blinker issue


The trailer harness that was installed probably has a short inside the box that distributes power to the trailer pig-tail. Remove the trailer harness. You problem will be cured.

Jan 27, 2009 | 1999 Toyota 4Runner

1 Answer

Trailer Connections


I took the vehicle to Bosch, an electrical expert in Germany.

Jun 28, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
2010 Suzuki Grand Vitara Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...