Question about Volvo XC90
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have seen car chargers that would blow the fuse. They were shorted out so look in the fuse box and replace the accessorie fuse and retest
Posted on Nov 17, 2009
SOURCE: pcv valve location
volvo s80 y reg 2.4 runs ok little bit lumpy tickoover when warm but very loud whistling noise take dipstick it stops but very big suction from tube not pressure it is not breather box under manifold
Posted on Mar 12, 2010
Tips for a great answer:
Jul 20, 2016 | 2006 Volvo XC90
Nov 04, 2015 | Volvo Cars & Trucks
Feb 21, 2015 | Volvo S60 Cars & Trucks
Dec 20, 2014 | 2007 Volvo XC90 3.0
Apr 09, 2014 | 2010 Volvo XC90
Sep 16, 2013 | 2004 Volvo XC90
Turn the Volvo 850 off and allow the engine and its components to cool for 30 minutes.
Open the hood of the Volvo 850 by pressing the hood release button within the vehicle. Locate the PCV valve; the valve is identified as a small rubber valve located on the engine crankcase. You will also notice a small hose sticking out of the end of the valve. If needed, read the Volvo 850 owner's manual for more information.
Disconnect the hose from the valve by pulling the hose out of the valve. The hose will come off the valve with minimal force.
Turn on the engine of the Volvo 850. Place your finger over the hole in the valve where the hose was connected. If you feel a strong suction, the valve is working properly and fine. If you do not feel a strong suction, the valve may be clogged and needs replacing.
Turn off the engine of the Volvo 850. Use needle-nose pliers and grip the valve. Pull the valve off of the crankcase.
Install a new valve by putting the valve in place on the crankcase. Insert the hose into the new PCV valve. Secure the new valve in place by pushing it down until it locks into place. Close the hood of the Volvo; pull up on the hood to ensure the hood is shut properly.
Jun 19, 2012 | Volvo S40 Cars & Trucks
Jan 10, 2010 | 2004 Volvo XC90
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: