Question about 2006 Ford Expedition

Open Question

2006 ford expedition indicator lights on dashboard

Does my 2006 ford expedition have a change oil light indicator

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: 2006 Ford Explorer "Oil Change Required" light is still on after changing the oil

IF YOU FIND THIS INFO USEFUL PLEASE RATE ME AS A FIXYA! THANKS

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Posted on Oct 15, 2008

  • 1 Answer

SOURCE: GEAR SHIFT INDICATOR LIGHT 2006 FORD EXPLORER

I had the same problem. They need to change the whole shift indicator assembly. Had mine fixed inn 30 minutes

Posted on Feb 08, 2009

djicenova
  • 319 Answers

SOURCE: 2006 ford exsplorer oil light did not go off after a

In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Posted on Mar 03, 2009

chuck943
  • 783 Answers

SOURCE: reset change engine oil soon light 2008 ford Expedition XLT

If you have the optional message center it is on page 144 of your owners manual. Press and release the SETUP
control to display “OIL LIFE =
XXX% then HOLD RESET = NEW”.

If you have the standard message center this begins on page 126 of your owners manual.

Posted on Apr 03, 2009

youredone82
  • 426 Answers

SOURCE: Change Oil light came on my 2006 Ford Escape

The change oil light is controlled by the main engine computer which monitors driving conditions and clock hours. Based on this data it suggest an oil change interval. The system, however has no way to know the oil was changed unless you tell it so. In your owners manual there is a procedure to "reset" this process in the engines computer. its normally done by holding a button and turning the ignition key on at the same time. It should be listed under oil change in the owners manual.

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What's your problem?2004 ford expedition service engine soon light


I assume you resolved the issues by now

Check lights have been on all vehicles for 31 years,
so you shouldn't be asking about them

Does not matter what light comes on your dash

The procedure is always the same
Check for codes
Diagnose & repair code related issues first

Aug 18, 2012 | 2004 Ford Expedition

1 Answer

I have a 2006 expedition 5.4 mifiring more so when hot


Does check engine light come on and if so could indicate a senor problem..

Aug 16, 2012 | 2006 Ford Expedition

2 Answers

What does the wrench warning light on my dashboard of my 2007 civic mean?


it usually means you are due for an oil change unless the last place that changed oil did not reset the light. Some Odometer displays will show you the oil life when you switch through the displays.

Feb 28, 2012 | 2007 Honda Civic GX NGV Sedan

1 Answer

How do you change the light bulb under the mirror on the drivers sides door?


How do you change a light bulb on the passenger side mirror of a 2006 ford expedition?

May 20, 2010 | 2003 Ford Expedition

1 Answer

How do i make the oil change required light go off after an oil c


I assume you are asking about a dashboard light? Look in your owner's manual in the glove box. On GM products there is a button in the fuse box which you depress and hold for 10 seconds with the ignition in ON position.

Apr 20, 2010 | 2006 Ford Explorer Sport Trac

1 Answer

My ford ka 2005 has electrical fault. Right indicator works sometimes, interior dashboard lights not at all and hand brake light on permanently


I have a ford ka 2006 and there is an intermittant fault with the dashboard lights coming on / off i have undone the steering wheel cowl and checked the plug onto the indicator stalk and this did not fix it also checked and played with indicator / light stalk still no good just comes on / off at any time any ideas?

Sep 22, 2009 | Ford Focus Cars & Trucks

2 Answers

2006 ford exsplorer oil light did not go off after a oil change.


In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Mar 03, 2009 | 2006 Ford Explorer

Not finding what you are looking for?
2006 Ford Expedition Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...