Question about 2005 Kia Spectra

Open Question

Kia sportage blower not working plug melted - 2005 Kia Spectra

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Repair Manual for Kia Sportage.

I just purchaced a 2000 Sportage and am having the same problem. I did find that Autozone.com has a free online manual that you can view and print sections from. I would rather have a book at my side when I repair my car, but until somebody comes up with one we are stuck with the online services.

Posted on Sep 22, 2008

Ad
  • 833 Answers

SOURCE: 2001 kia sportage blower motor resister

Rule of thumb...unless you get a better answer:  look for a couple of wires on a small plate that is in the airflow of the fan on the heater/ac unit.  The resistor pack is always air cooled by the fan.

Posted on Nov 11, 2008

  • 5 Answers

SOURCE: 1999 KIA Sportage, 2WD. No heat, fan, A/C

did you check the switch to the control cluster ? incase you dont know what im talkin about the switch that turns it on and off and adjusts speed? if its not that then do you have a blown fuse becouse the blower moter has an independant fuse some times in the fuse box there may be 2 1 in the car and the other under the hood try that let me know if its fixed

Posted on Dec 13, 2008

  • 250 Answers

SOURCE: 199 kia sportage heater blower motor stops then

a bad earth or chaffed wire

Posted on Aug 15, 2009

  • 1 Answer

SOURCE: 2001 Kia sportage blower motor resistor has been

hi there i was wonder can anyone help me i have replaced my heater blower resister has been replaced and now has stoped working again what is the problem can someone plz help me. the fan is working fine i ran a ground wire and it works but only on high and will not turn off

Posted on Jun 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia blower motor


On many vehicles the connectors for the fan will heat and melt causing an intermittent connection which sounds like what you are describing check all your connectors that run from your fan motor if you can get to them check for any signs of melting or corrosion. Hope this helps some

Jan 14, 2014 | Cars & Trucks

2 Answers

Dead Fan blower 2006 Kia Sportage has 12v power, should I replace it?


Could be your blower motor resistor,it's mounted next to the blower motor,Autozone will take part back for refund if it don't fix problem.Here's what it looks like,Here's where the blower motor is.Easy to remove,disconnect electrical connector,remove 2 screws,can't look at it to tell if bad.Here's the relay.

Dec 23, 2012 | 2006 Kia Sportage

1 Answer

Heater blower motor.,Highspeed only works..problem??


9 out of 10 times its the heater fan resistor doing this. it has wires that corresponed to diffreent speed settings for heater fan. the resistor is beside the blower motor, Your Kia Sportage Blower Motor Resistor controls the heating equipment in the vehicle by opening and closing the fan motor. The Kia Sportage Blower Motor Resistor allows the heating and climate control system to control the speed of the vehicle's cooling fan. its under the passenger side glove box. undo 2 screws and disconnect the electrical connector. thats it!!

Jan 24, 2012 | 2000 Kia Sportage

1 Answer

Replaced blower motor in my 2001 kia sportage ex, fan only works on high. Any suggestions?


It could be the blower motor resistor, the high position feeds full 12 volt power directly to the blower motor. All lower settings route through the blower motor resistor. It is usually located under the passenger side dash, not far from the blower motor. Two screws secure it to the heater box.

Mar 16, 2011 | 2001 Kia Sportage

1 Answer

Sportage blower only works on high speed


chage blower speed switch ****not the one in dash the one in your heater box passanger side feet board heater box arear cant miss 2 screws 2 wire plug locations very models pending this is where i would look

Dec 23, 2009 | 2000 Kia Sportage

1 Answer

2001 Kia Sportage A/c Blower speed changes by itself


you need to remove clean and reattache all grounds with star washers so they dig in and fight corrosion

Jul 21, 2009 | 2001 Kia Sportage

1 Answer

2006 Kia Sportage A/C no air is coming through vent


Does the blower work when you turn off the A/C? If not, it sounds like either the blower motor, relay or blower switch took a poo! 06 Kia? Should still be under warranty.

Jun 08, 2009 | 2006 Kia Sportage

7 Answers

Repair Manual for Kia Sportage.


I just purchaced a 2000 Sportage and am having the same problem. I did find that Autozone.com has a free online manual that you can view and print sections from. I would rather have a book at my side when I repair my car, but until somebody comes up with one we are stuck with the online services.

Sep 20, 2008 | 1999 Kia Sportage

Not finding what you are looking for?
2005 Kia Spectra Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...