Question about 1999 Mitsubishi Diamante

2 Answers

Tcl and antilock brake lights stay on

It sounds like it rubs when I turn the wheel

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

This may be indicating a faulty wheel speed sensor, the unusual sounds may be a worn wheel bearing, which could be the cause of the sensor not working. Have the suspect wheel hub examined.

Posted on Jan 08, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 251 Answers

Did you get work done on your brakes recently? If so it could be air in the lines. This would mean quite a soft pedal as well.

You should get it checked out it could be the hydraulic valves on the unit itself.

Posted on Jan 08, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: I Have a problem with my 2000 Galant TCL and

SOUND LIKE WHEEL SENSOR.CHECK THE REAR TIRE THAT HAD A FLAT TIRE.CHECK TO SEE IF WHEEL SENSOR WIRE IS IN CONTACT.OR DAMAGE WHEEL SENSOR.IF ALL IS GOOD.LET DEALERSHIP SCAN IT.TO CHECK THE ABS BRAKES SYSTEM.

Posted on Aug 10, 2009

taran_2005
  • 10515 Answers

SOURCE: TCL and Antilock lights

Hi,

I am sorry to hear regarding the trouble.

Be advised that as i am not there, i cannot provide legitimate 2nd opinion.However,i would be glad to add few inputs to the diagnosis.

This typically means you have a failing wheel speed sensor.To check if sensor is working, jack up tire backprobe the 2 wires going into sensor. And with voltmeter check for ac voltage while spinning the wheel. Whatever sensor does not put out voltage needs to be replaced. It could also be a loose connection.

Do not forget to ' ACCEPT ' the solution, so that i could get the credit for my time.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Jul 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i bleed antilock brakes


This is best done with 2 people , 1 to operate brake pedal the other to open and close blleed nipples at wheel. Make sure that fluid reservoir is kept full during bleeding. Start with wheels closest to reservoir. Open bleed nipple and press brake pedal repeatedly until pressure increases. Do each wheel in turn topping up with fresah fluid as needed.

Mar 04, 2016 | Cars & Trucks

1 Answer

Brake problem


your antilock brakes are activating. i would suspect one of your wheel speed sensors is acting up. (showing 0 mph while moving). need to get a scanner on it and monitor the wheel speed sensors, suspect you will see one reading 0 usually at lower speeds.

Feb 26, 2010 | 1997 Oldsmobile Bravada

1 Answer

ABS light & trak off light keep coming on. Grinding noise & vibration can be felt on brake peddle. Brakes have been checked. Wheel bearing was replaced on drivers side. Sometimes making a pulsing...


It sounds like "False Antilock Mode" to me. Your Antilock Brake Control Module "thinks" that you have a wheel locking up. This is probably caused by a bad wheel sensor. You need to scan the module to find out which one.

Oct 03, 2009 | 2003 Pontiac Grand Prix

1 Answer

When turning left the antilock brake light and bell comes on


you may have a loose wheel bearing & warped brake disc!
most people not even most mechanics dont realise that a loose wheel bearing can prevent the brakes from being blead up due to the movemnt !!
Cheers Rob

Aug 15, 2009 | 2006 Chevrolet Silverado 1500HD

1 Answer

I Have a problem with my 2000 Galant TCL and Antilock Brake light. They stay on constantly since I had a rear flat tire.


SOUND LIKE WHEEL SENSOR.CHECK THE REAR TIRE THAT HAD A FLAT TIRE.CHECK TO SEE IF WHEEL SENSOR WIRE IS IN CONTACT.OR DAMAGE WHEEL SENSOR.IF ALL IS GOOD.LET DEALERSHIP SCAN IT.TO CHECK THE ABS BRAKES SYSTEM.

Aug 10, 2009 | 2004 Mitsubishi Galant

1 Answer

Antilock light is on and trac light is on sound


You have a bad hub bearing. 100% garunteed. The light is on because the bearing is so bad it hit the sensor for the abs & traction control , breaking it. So you're gonna need a bearing, a sensor,probably new brake pads,any seals{probably one} & a shop that can do it. The bearing is pressed in & needs to be pressed out. Heating & beating is not a good idea.

Jun 20, 2009 | 2003 Oldsmobile Alero

1 Answer

Antilock brake light stays on


Start with checking the sensors on each wheel.  These will be the electrical wires that come from behind each wheel.  Also check that the tire pressure in each tire is the same.  Next, check your brake fluid level.
Sorry...that's all I can help you with.  Maybe someone else can help you from here.

Apr 21, 2009 | 1994 Buick Century

1 Answer

Right rear wheel has rubbing and grinding noises, as on cast iron


My advise is to adjust the rear brakes. The drum should not move in a side to side fashion. adjusting the brakes will also more than likely take care of that anti lock brake light also. adjust the brakes up to where the rear wheel will spin but you should be able to hear the brake show dragging slightly on the drum.

Apr 06, 2009 | 2001 Mitsubishi Eclipse Spyder

1 Answer

1991 Lincoln Towncar anti brake lock light stays on.


It's very possible you have a faulty wheel sensor. Look behind each wheel. Around the center you can see a wire harness attached. Check each wire harness for broken wires. I don't think this car has a self test to tell you which wheel has the problem. You will probably have to take it to the dealer and let them tell you.
When the antilock light comes on your cars system is telling you of a problem and also that you have standard brakes now and no antilock.
You can most probably drive normally as long as the system is staying full of brake fluid.

Apr 03, 2009 | 1991 Lincoln Town Car

2 Answers

Abs light stays on


It sounds like you have a bad sensor on one of the wheels.Sometimes you can take the veh to autozone or advanced auto parts and they can hook it up to thier scanner and tell you which one is bad(they do this for free) if they have an abs scanner.

Mar 30, 2009 | 2002 Isuzu Rodeo

Not finding what you are looking for?
1999 Mitsubishi Diamante Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...