Question about 1996 Mazda Protege
Replaced fuel pump, starter, plugs, fuel injectors and computer. Fuel is filling the cylinders. there is spark. battery is fine. cranks but will not turn over. What is the problem?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well, with all that you have changed the only two possible things that are left PCM and the ECM....
Do you have an alarm system on this vehicle? If you purchased this car second hand it may have something that is inhibiting the engine from firing. From what you have told us here that would be where I would start looking.
I really hope this is helpfull
Posted on Aug 10, 2008
put a small amount of fuel in the intake near the throttle plate then crank and see if it fires, if it does then it's a fuel problem, if it does not fire then pull a plug wire and put a philips head screw driver into the plug wire hold it 1/4 inch away from a good ground then have someone crank it over, you should see spark and it should be blue, if not then you have a ignition problem a bad coil or cam sensor but need to know what you found out on the two tests I told you first to give you a direction to go.
Posted on May 29, 2009
Yes - sounds like a Pump fuse, relay, or a pump...When you cycle the key (off-on-start-on) do you hear the pump running?
The fuel pump fuse may be under the hood with the other engine fuses - and it well may not be -(there is an accessory fuse box that has all the fuses for the inside accessories in it - located in the passenger compartment somewhere)- also check the kick panels at the drivers left foot and the passengers right foot -(If they pop off easily - The fuse box plastic cover will pop off easily, not attached with screws - so if you see screws or nuts, it won't be there) Look up under the dash on the drivers side, and also lastly check in the glove box- If you cannot find it, I'd see if I could find a Mazda "lovers" web-site - Often they post what is called "component locator" information, that would tell you exactally where it is (Normally you have to pay for access to that information - gotta love the web), or you may be able to locate a electronic owners manual there as well which will definitely tell you ...Best of luck and hope that helps some....
Posted on Sep 13, 2009
SOURCE: 1999 Mazda Protege won't start.
Recheck that the spark plug firing order or in other words the spark plug wires are in the proper order after that checks out ok, then run dry gas in the car and check all vacuum hoses there may be a vacuum leak somewhere.
Posted on Nov 06, 2009
Tips for a great answer:
Sep 18, 2017 | Mazda Cars & Trucks
Nov 13, 2013 | Cars & Trucks
Dec 25, 2012 | 1994 Mazda Protege
Sep 23, 2012 | 1997 Mazda Protege
Oct 07, 2017 | 1996 Chevrolet K1500
Oct 26, 2009 | 1994 Mazda Protege
Mar 27, 2017 | 1996 Mazda Protege
259 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: