Question about 1988 Toyota Pickup

1 Answer

Door panel how do I get the handle to roll the window down so i can remove door panel?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Get A Small Flat Head Use Your Hand To Press Near The Handle Crank And You'll Be Able To View A Small Snap Ring Holding It On. Use The Small Flat Head To Push One Side Of The Snap Ring Off And The Other Side Will Fallow.
Thanks For Using Fixya.com
Sincerely,
Michael Scott

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove rear door glass?


Remove Inner door panel, usually, the door handle has a screw, behind the lever, on the inside, and may be covered by a plastic cover, take the screw out, and move the handle forward, then take, the side on clip, off, the rod.
remove, any inside door handles, screw to door, and then starting from the bottom, pull the panel towards you, unsnapping, the plastic clipps, holding them on the door.
Roll window down, till you can see the 2 nuts, holding the bottom of the window.
Now, run the window mechanism, all the way down, away from window, while holding window.
Now it is loose, twist the window, inside the door, front down, back up, so, it comes out, the top
Put back, same way

May 21, 2014 | 2001 Toyota Highlander

2 Answers

How do I remove the handle in door panel? I'm trying to remove the door because my window fell off the track, it doesn't have power windows so I have to manually roll them up and down.


1- remove the window crank
2- remove any screws from the door panel; sometimes they are hidden by a plastic cap. look inside the elbow rest cavity; remove any screws you see.
3- insert a flat plastic or wooden tool in the shape of (roughly) a scraper, between the door panel and door and start prying the clips which hold the panel to the sheet metal. get as close to the clips as possible with the tool, as that will be the easiest way. there are about 8 of these clips on an average door. when all the clips have come loose of the sheet metal, lift the panel straight up to remove it. you will find a metal rod attached to the inside of your handle; unfasten it and remove the panel completely. that handle looks like it is part of the panel and cannot be removed separately.

Mar 15, 2013 | Cars & Trucks

1 Answer

How do I remove the door panel if I can't open the door?


Either roll down the window and try to use a slim jim or coat hanger down thru the window to raise the handle rod, or remove the seat and the door panel.

Oct 07, 2012 | Chevrolet 1500 Cars & Trucks

1 Answer

The driver side window in my 1988 ford ranger will not roll down. Its manual. What's the problem and how should I fix it???


Remove the clips in the inside of the window handle,also clips on door handle.Look for any screws holding the door panel on, then take a screwdriver and pry the door panel away from the door. re install the window handle,and try rolling the window down. You will probably see what is stopping it. If it looks like the window regulator is worn out, check the local junk yards for a replacement.

Jul 16, 2011 | 1988 Ford Ranger

1 Answer

My manual roll up/down window does not work. How do I fix it. how do I get the panel off ? Do I need to take off the roll up down handle to get the door panel off, if so how do I take the handle off?...


you do need to remove the door handles to remove the door trim panel, if it has arm rests on the panel look for 2 or 3 plastic plugs which only press in and are easy to remove with a blade, if they are not present the arm rest may be part of the trim as one unit.
the winder handle may have a spring clip behind the handle and the trim, if that is the case you will need a special tool to remove the clip. also check for any screws that may be holding the panel to the door, when all screws etc are removed just lever the panel away from the door with a flat blade or screwdriver. hope this info helps

Jun 11, 2010 | 1998 Pontiac Sunfire

1 Answer

CAN NOT REMOVE DOOR PANEL


after removing door handles,arm rests, etc.,roll down your window,the panel will only come off after the window is rolled down.push the top of the panel towards the window,there's a piece of trim connected to the top of the door panel that hooks to the top of the inner door

Nov 04, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

The drivers side window will not roll up or down. All other windows will. At night I can see the light flahing on the switch if I try to roll it down


It sounds like your switch may be faulty or there's a short somewhere

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the switches and test them

Oct 08, 2009 | 1999 Toyota RAV4

1 Answer

Passenger window makes loud noise when rolled down


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should be able to see what the window is catching on.
I've seen cases where the lock cylinder comes loose and hits the window

Oct 07, 2009 | 2003 Toyota Corolla

1 Answer

Manual window won't roll up


so is the right rear door ??
if so here are some instructions.
  1. If applicable, remove the regulator handle by pulling the clip out with a wire hook.
  2. Remove the inside door handle and disconnect the latch rod.
  3. Remove the screws and detach the clips attaching the door panel (see trim pad remover.
  4. Disconnect the power window and courtesy light harnesses.
  5. Remove the door panel bracket and carefully remove the plastic cover
  6. Remove the screw attaching the door lock crank. Disconnect the latch rod from the latch side.
if you have an email address i can send some images on how to do it.
hope this helps

Jun 07, 2008 | 1991 Honda Accord

1 Answer

Removing rear door panel


Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only)
Remove the rear door inside handle housing.
Remove the mounting screws (3EA) from the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Remove the door pull handle mounting bracket and door inside handle.

May 29, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...